Friday, 21 September 2018 08:15

V0810 6" 20:1 High Viscous Fluid Transfer Pump

Cosmostar V0810 provide flow rate up to 4.5 liter per minute (1.2 gpm) and operating pressures up to 248 bars.

  • High output per cycle; reduced wearing for longer life and lower repair costs
  • Large internal porting for maximum flow
  • Additional Air-Powered Ram is available for improving performance

Application

  • Handling heavy-to-inflowing fluids
  • No additional viscosity reducer fluid needed when handling heavy-to-flow fluids
  • Dispensing silicone, latex or acrylic sealants
  • Dispensing greases and other lubricants
Typical Fluids Handled
  • Sealants
  • Adhesives
  • Lubricants
  • Inks
  • Mastics

Techanical Data

Air Inlet Size1/4 pt
CategoryData
Air Motor Diameter 6 inches (Compact)
Pressure Ratio 20:1
Maximum Fluid Working Pressure 3600 PSI (248 Bar)
Maximum Air Input Pressure 120 PSI (8.3 Bar)
Maximum Volume Flow Rate 1.2 GPM(4.5 lpm)
Fluid Outlet Size 3/4 pt
Weight 30 kg (Bare Pump)

Manual

TBD

Published in Sealant Piston Pumps
Friday, 10 November 2017 02:51

S0900 Air Spray Packages

High quality, fine finish spray package for wood and metal applications. S0900 is an air-operated diaphragm spray package that combines quality pumping system, rugged design and accurate regulators to produce a first rate spray finishing system. jQuery UI Accordion - No auto height

Feature and Benefits

  • High-quality-finish and low pulsation output deliver a consistent spray pattern
  • Easy-to-use, quick color changes and fast material refills save more time and money
  • Rugged construction made of stainless steel or aluminum pump handles a wide variety of fluids
  • Typical Applications

      Typical Applications
    • General coatings
    • PU coatings
    • UV special coatings
    • Water-soluble coatings for leather
    • Timbering spraying
    • Furniture spraying
    • Spraying for small-scale works
    Typical Fluids Handled
    • Dyes
    • Ink
    • Coatings
    • Solvent
    • Lubricant

    Technical Data

    CategoryData
    Pressure ratio 1:1
    Spray paint flow rates 4~5 LPM
    Air pressure operating range 2~7 kg/cm2
    Maximum pressure output 6 kg/cm2
    Maximum recommended pump speed 300cycles/minute
    Air inlet size 1/4 pt(f)
    Fluid inlet size 1/4 pt(f)

    Manual

    TBD

    Published in Air Spray Set
    Monday, 04 July 2016 07:34

    D0906 1" Double Diaphragm Pumps

    Designed for high output volume per cycle, high power and performance Ideal for transferring a wide variety of fluid, D0906 offers high pumping capacity in a small package. D0906 pump guarantees high endurance and durability. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 175 liters per minute, in a small portable package
  • Clean, hands-off fluid handling
  • High performance with high mobility
  • Application

      Typical Application
    • Drum transfer for fluids up 5000 cps
    • Unloading fluid
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 175 LPM
    Maximum pumpable fluid viscosity 5000 CPS
    Maximum Air Consumption 1600 LPM
    Maximum Suction Lift 8.3m
    Maximum size pumpable solids 3 mm
    Air pressure operating range 2.0 - 8.0 bar
    Air Inlet Size 1/2 pt
    Fluid Outlet Size 1 pt
    Fluid Inlet Size 1 pt

    Manual

    TBD

    Published in Diaphragm Pumps
    Monday, 04 July 2016 06:51

    D0908 2" Double Diaphragm Pumps

    D0908 is designed to handle high viscous fluid and to deliver high flow rate. Large sized, solid, chemically-inert Teflon plates in both compartments make D0908 suitable to pump wide variety of liquid, even the most aggressive ones. jQuery UI Accordion - No auto height

    Features

  • Bigger ports for higher flow rates, up to 620 liters per minute
  • Lubrication-less operation
  • Designed for tough environments
  • Application

      Typical Application
    • Drum transfer for fluids up 10000 cps
    • Unloading fluid
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 620 LPM
    Maximum pumpable fluid viscosity 10000 CPS
    Maximum Air Consumption 5500 LPM
    Maximum Suction Lift 8.1m
    Maximum size pumpable solids 7 mm
    Air pressure operating range 2.0 - 8.0 bar
    Air Inlet Size 3/4 pt
    Fluid Outlet Size 2 pt
    Fluid Inlet Size 2 pt

    Manual

    TBD

    Published in Diaphragm Pumps
    Friday, 01 July 2016 10:00

    D0307 1 1/2" Double Diaphragm Pumps

    D0307 is designed for handling heavier, higher viscosity fluid and pumping large size solids faster. Chemically-inert Teflon plates in both compartments make D0307 suitable to pump wide variety of liquid, even the most aggressive ones. jQuery UI Accordion - No auto height

    Features

  • Larger ports for larger flow rates, up to 340 liters per minute
  • Freely lubricate operation
  • Used in various tough environment and condition
  • Application

      Typical Application
    • Drum transfer for fluids up 10000 cps
    • Unloading fluid
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 340 LPM
    Maximum pumpable fluid viscosity 10000 CPS
    Maximum Air Consumption 5500 LPM
    Maximum Suction Lift 6.1m
    Maximum size pumpable solids 7 mm
    Air pressure operating range 2.0 - 8.0 bar
    Air Inlet Size 3/4 pt
    Fluid Outlet Size 1 1/2 pt
    Fluid Inlet Size 1 1/2 pt

    Manual

    TBD

    Published in Diaphragm Pumps
    Friday, 01 July 2016 09:35

    D0903 3/4" Double Diaphragm Pumps

    The D0903 is designed for handling light to medium viscosity fluid with high flow rates up to 120 liters per minutes. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 120 liters per minute, in a small portable package
  • Clean, hands-off fluid handling
  • Quiet running, up to 85dB with easy to use remote muffler capability for even lower noise levels
  • Application

      Typical Application
    • Drum transfer for fluids up 5000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    • Cleaning fluids and detergents
    • Plating and dip tanks
    • Water treatment
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.3 bar
    Maximum Flow Delivery 120 LPM
    Maximum pumpable fluid viscosity 5000 CPS
    Maximum Air Consumption 1200 LPM
    Maximum Suction Lift 8.3m
    Maximum size pumpable solids 2 mm
    Air pressure operating range 1.5 - 8.3 bar
    Air Inlet Size 1/2 pt
    Fluid Outlet Size 3/4 pt
    Fluid Inlet Size 3/4 pt

    Manual

    TBD

    Published in Diaphragm Pumps
    Friday, 01 July 2016 09:12

    D0302 3/8" Double Diaphragm Pumps

    D0302 3/8" pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluids. Installed with Teflon plate at each of the diaphragm compartments, D0302 Pumps guarantee high endurance and durability. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 23 liters per minute, in a small portable package
  • Easy maintenance air valves and ball checks
  • Operate on as little as 20 psi (1.4bar) air pressure
  • Low noise
  • Application

      Typical Application
    • Drum transfer for fluids up 3000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 23 LPM
    Maximum pumpable fluid viscosity 3000 CPS
    Maximum Air Consumption 300 LPM
    Maximum Suction Lift 0.9 m dry, 6.3m wet
    Maximum size pumpable solids 1 mm
    Air pressure operating range 1.4 - 8.0 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 3/8 pt
    Fluid Inlet Size 3/8 pt

    Manual

    TBD

    Published in Diaphragm Pumps
    Friday, 01 July 2016 08:19

    D0902 3/8" Double Diaphragm Pumps

    D0902 3/8" pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluids. Installed with Teflon plate at each of the diaphragm compartments, D0902 Pumps guarantee high endurance and durability. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 23 liters per minute, in a small portable package
  • Easy maintenance air valves and ball checks
  • Operate on as little as 20 psi (1.4bar) air pressure
  • Low noise
  • Application

      Typical Application
    • Drum transfer for fluids up 3000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 23 LPM
    Maximum pumpable fluid viscosity 3000 CPS
    Maximum Air Consumption 300 LPM
    Maximum Suction Lift 0.9 m dry, 6.3m wet
    Maximum size pumpable solids 1 mm
    Air pressure operating range 1.4 - 8.0 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 3/8 pt
    Fluid Inlet Size 3/8 pt

    Manual

    TBD

    Published in Diaphragm Pumps
    Friday, 01 July 2016 06:46

    D0306 1" Double Diaphragm Pumps

    Designed for high output per cycle, high power and performance.Ideal for transferring a wide variety of fluids. D0306 offers high pumping capacity in a small package. D0306 pumps are also available with a stainless steel body, which makes them ideal to operate in highly hygienic environment. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, up to 133 liters per minute, in a small portable package
  • Clean, hands-off fluid handling
  • High performance with high mobility
  • Application

      Typical Application
    • Drum fluid transfer
    • Unloading fluids
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.3 bar
    Maximum Flow Delivery 113 LPM
    Maximum pumpable fluid viscosity 5,000 CPS
    Maximum size pumpable solids 3.2 mm(116 PSI)
    Air pressure operating range 1-8 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 1 pt
    Fluid Inlet Size 1 pt

    Manual

    TBD

    Published in Diaphragm Pumps
    Sunday, 29 May 2016 07:30

    V0801 10" 55:1 Ram-Mounted Pumps

    Easy handling extremely viscous fluidCOSMOSTAR V0801 High Viscous Fluid Transfer Pump concentrates on handling high viscous materials. It guarantees a smooth handling of high viscous materials with adequate flow rate for efficient work. jQuery UI Accordion - No auto height

    Features

    Cosmostar V0803 provide flow rate up to 14.4 liter per minute (3.8 gpm) and operating pressures up to 440 bars.
  • High output per cycle; reduced wearing for longer life and lower repair costs
  • Large internal porting for maximum flow
  • Additional Air-Powered Ram is available for improving performance
  • Application

    • Handling heavy-to-inflowing fluids
    • without having to inject additional viscosity reducer fluids.
    • Dispensing silicone, latex or acrylic sealants
    • Dispensing greases and other lubricants
    Typical Fluids Handled
    • Sealants
    • Adhesives
    • Lubricants

    Techanical Data

    CategoryData
    Air Motor Diameter 10 inches (Hulk)
    Pressure Ratio 55:1
    Maximum Fluid Working Pressure 440 Bar(6380 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate 14.4 lpm (3.8 gpm)
    Air Inlet Size 3/4 pt
    Fluid Inlet Size Ram-Mounted 5G or 55G
    Fluid Outlet Size 3/4" pt
    Weight 160 kg (55G)/ 110 kg(5G)

    Manual

    TBD

    Published in Sealant Piston Pumps
    Page 1 of 2
    //Counter