Logo
Print this page
PF60 Plural Component Sprayer

PF60 Plural Component Sprayer

For spraying PU foam application, COSMOSTAR PF60 24:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. jQuery UI Accordion - No auto height

Features

Equipped with two positive displacements can provide the most reliable mixing ratio and Compact 6" can always achieve your expectation about fluid atomization.
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand
  • Application

    • Plural component materials
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter6 inches (COMPACT)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)24:1
    Maximum Fluid Working Pressure 2880 PSI (200 Bar)
    Maximum Air Input Pressure 120 PSI (8.3 Bar)
    Maximum Volume Flow Rate 3.8 LPM (1.0 GPM)
    Air Inlet Size 3/4 npt(f)
    Fluid Inlet Size 3/4 npt(f)
    Fluid Outlet Size 3/8 npt(f)
    Maximum Operating Temperature 180F (82C)

    Manual

    TBD

    COSMOSTAR TECH. LTD. Email: sales@cosmostar.net Tel:+886-2-26687799 Fax:+886-2-26688991
    Use of this site constitutes acceptance of our user agreement and privacy policy.
    The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of COSMOSTAR Tech.