New Articles & Products

What is the difference between high pressure airless and air sprayer?

The difference between high pressure airless and air sprayer is the principal of air atomizing spray. High-pressure airless sprayer use pressure to atomize paint sprayer, so spray gun doesn’t need to rely on compressed air to assist in atomizing the paint.  Because the high-pressure airless sprayer spraying area is extremely wide really, so it’s suitable for application on the hull, container, large buildings, and wall and floors of the new building.  Using airless sprayer also less material waste than air sprayer

Airless sprayer equipment can be divided into three types: Electrical, Pneumatic, & Hydraulic. There are advantages and disadvantages, Here as follow :

      1. Advantages:

  • A wide spray volume of paint, high working efficiency, increase efficiency up to 60-80%
  • Can spray high viscous material and get uniform coating layer
  • Material dilution relatively low, the higher layer thickness can be achieved in one spray
  • Not using air compressed directly in the spray gun, so the oil and moisture are not easy to penetrate the paint material.
  • The spray paint no need much recovery time, which can save the amount of paint.

        2.  Disadvantages:

  • Can not adjust the amount of paint spray like air spraying.
  • If there is not enough pressure during the start and final spraying phases, the sprayed particle will be more uneven.
  • Spray material coating with a lot of extender pigments (solid particles with various particulate size) can easily cause nozzle blockage.
  • The spraying volume of the paint is large and wide, not suitable for coat small objects or complex shapes.
  • Due to the high-pressure operation, the knowledge of operators must be strengthened.

 

 

Air motors- Why are these motors something to be preferred?

Air motors are used for producing continuous rotary power from the compressed air system. These boast number of benefits over the electric motors. The advantages are:

  1. As these do not require electrical power so these could be used for the volatile atmospheres.
  2. These generally comprise a high density of power and so a smaller air motor could deliver the same power as the electric counterpart.
  3. The electric motors are unlike the air motors and could operate without requiring the auxiliary speed reducers.
  4. The overloads could exceed the torque of stall and generally cause no harm to the air motors. With electric motors however overloads could trip the circuit breakers and therefore an operator must reset them before the equipment is restarted.
  5. The motor speed could be regulated along with simple flow control valves instead of expensive as well as complicated electronic speed controls.
  6. The motor torque could be varied simply through the regulation of the pressure.
  7. These motors do not require magnetic starters, overload protection, or the host of support components that are required by electric motors.
  8. These motors generate less heat than electric motors.

The common designs for the air motors are inclusive of the rotary vane, radial piston, diaphragm, and much more. These motors are commonly used for industrial applications. Even so, the usage of these motors ranges from the food industry, medical, and even the nuclear power generation.

Air motors occupy a niche as far as the sources of power are concerned. It is well suited to the applications which need a compact, lightweight source of smooth as well as vibrationless power. These motors stop and start almost instantly and could provide extremely variable torque and speed without any complicated controls. These motors operate in hot, corrosive as well as wet environments without any damage and are least affected by continuous stalling as well as overload. Apart from this, these are instantly reversible and unlike the electric motors can run cool and start without any shock. There is no heat buildup as well as electric sparks for damaging the motor.

As these are cooled constantly through the injected air so these motors would not overheat even at high speed. These motors have been a popular choice in environments where the danger of explosion exists.

If you are looking for the best quality Air motor then you can get them from us. We also deal with the two-component spray paint machine, Polyurea spraying machineandPneumatic agitator.

Air motors- Why are these motors something to be preferred?

Air motors are used for producing continuous rotary power from the compressed air system. These boast number of benefits over the electric motors. The advantages are:

  1. As these do not require electrical power so these could be used for the volatile atmospheres.
  2. These generally comprise a high density of power and so a smaller air motor could deliver the same power as the electric counterpart.
  3. The electric motors are unlike the air motors and could operate without requiring the auxiliary speed reducers.
  4. The overloads could exceed the torque of stall and generally cause no harm to the air motors. With electric motors however overloads could trip the circuit breakers and therefore an operator must reset them before the equipment is restarted.
  5. The motor speed could be regulated along with simple flow control valves instead of expensive as well as complicated electronic speed controls.
  6. The motor torque could be varied simply through the regulation of the pressure.
  7. These motors do not require magnetic starters, overload protection, or the host of support components that are required by electric motors.
  8. These motors generate less heat than electric motors.

The common designs for the air motors are inclusive of the rotary vane, radial piston, diaphragm, and much more. These motors are commonly used for industrial applications. Even so, the usage of these motors ranges from the food industry, medical, and even the nuclear power generation.

Air motors occupy a niche as far as the sources of power are concerned. It is well suited to the applications which need a compact, lightweight source of smooth as well as vibrationless power. These motors stop and start almost instantly and could provide extremely variable torque and speed without any complicated controls. These motors operate in hot, corrosive as well as wet environments without any damage and are least affected by continuous stalling as well as overload. Apart from this, these are instantly reversible and unlike the electric motors can run cool and start without any shock. There is no heat buildup as well as electric sparks for damaging the motor.

As these are cooled constantly through the injected air so these motors would not overheat even at high speed. These motors have been a popular choice in environments where the danger of explosion exists.

If you are looking for the best quality Air motor then you can get them from us. We also deal with the two-component spray paint machine, Polyurea spraying machineandPneumatic agitator.

Air motors- Why are these motors something to be preferred?

Air motors are used for producing continuous rotary power from the compressed air system. These boast number of benefits over the electric motors. The advantages are:

  1. As these do not require electrical power so these could be used for the volatile atmospheres.
  2. These generally comprise a high density of power and so a smaller air motor could deliver the same power as the electric counterpart.
  3. The electric motors are unlike the air motors and could operate without requiring the auxiliary speed reducers.
  4. The overloads could exceed the torque of stall and generally cause no harm to the air motors. With electric motors however overloads could trip the circuit breakers and therefore an operator must reset them before the equipment is restarted.
  5. The motor speed could be regulated along with simple flow control valves instead of expensive as well as complicated electronic speed controls.
  6. The motor torque could be varied simply through the regulation of the pressure.
  7. These motors do not require magnetic starters, overload protection, or the host of support components that are required by electric motors.
  8. These motors generate less heat than electric motors.

The common designs for the air motors are inclusive of the rotary vane, radial piston, diaphragm, and much more. These motors are commonly used for industrial applications. Even so, the usage of these motors ranges from the food industry, medical, and even the nuclear power generation.

Air motors occupy a niche as far as the sources of power are concerned. It is well suited to the applications which need a compact, lightweight source of smooth as well as vibrationless power. These motors stop and start almost instantly and could provide extremely variable torque and speed without any complicated controls. These motors operate in hot, corrosive as well as wet environments without any damage and are least affected by continuous stalling as well as overload. Apart from this, these are instantly reversible and unlike the electric motors can run cool and start without any shock. There is no heat buildup as well as electric sparks for damaging the motor.

As these are cooled constantly through the injected air so these motors would not overheat even at high speed. These motors have been a popular choice in environments where the danger of explosion exists.

If you are looking for the best quality Air motor then you can get them from us. We also deal with the two-component spray paint machine, Polyurea spraying machineandPneumatic agitator.

Air motors- Why are these motors something to be preferred?

Air motors are used for producing continuous rotary power from the compressed air system. These boast number of benefits over the electric motors. The advantages are:

  1. As these do not require electrical power so these could be used for the volatile atmospheres.
  2. These generally comprise a high density of power and so a smaller air motor could deliver the same power as the electric counterpart.
  3. The electric motors are unlike the air motors and could operate without requiring the auxiliary speed reducers.
  4. The overloads could exceed the torque of stall and generally cause no harm to the air motors. With electric motors however overloads could trip the circuit breakers and therefore an operator must reset them before the equipment is restarted.
  5. The motor speed could be regulated along with simple flow control valves instead of expensive as well as complicated electronic speed controls.
  6. The motor torque could be varied simply through the regulation of the pressure.
  7. These motors do not require magnetic starters, overload protection, or the host of support components that are required by electric motors.
  8. These motors generate less heat than electric motors.

The common designs for the air motors are inclusive of the rotary vane, radial piston, diaphragm, and much more. These motors are commonly used for industrial applications. Even so, the usage of these motors ranges from the food industry, medical, and even the nuclear power generation.

Air motors occupy a niche as far as the sources of power are concerned. It is well suited to the applications which need a compact, lightweight source of smooth as well as vibrationless power. These motors stop and start almost instantly and could provide extremely variable torque and speed without any complicated controls. These motors operate in hot, corrosive as well as wet environments without any damage and are least affected by continuous stalling as well as overload. Apart from this, these are instantly reversible and unlike the electric motors can run cool and start without any shock. There is no heat buildup as well as electric sparks for damaging the motor.

As these are cooled constantly through the injected air so these motors would not overheat even at high speed. These motors have been a popular choice in environments where the danger of explosion exists.

If you are looking for the best quality Air motor then you can get them from us. We also deal with the two-component spray paint machine, Polyurea spraying machineandPneumatic agitator.

Air motors- Why are these motors something to be preferred?

Air motors are used for producing continuous rotary power from the compressed air system. These boast number of benefits over the electric motors. The advantages are:

  1. As these do not require electrical power so these could be used for the volatile atmospheres.
  2. These generally comprise a high density of power and so a smaller air motor could deliver the same power as the electric counterpart.
  3. The electric motors are unlike the air motors and could operate without requiring the auxiliary speed reducers.
  4. The overloads could exceed the torque of stall and generally cause no harm to the air motors. With electric motors however overloads could trip the circuit breakers and therefore an operator must reset them before the equipment is restarted.
  5. The motor speed could be regulated along with simple flow control valves instead of expensive as well as complicated electronic speed controls.
  6. The motor torque could be varied simply through the regulation of the pressure.
  7. These motors do not require magnetic starters, overload protection, or the host of support components that are required by electric motors.
  8. These motors generate less heat than electric motors.

The common designs for the air motors are inclusive of the rotary vane, radial piston, diaphragm, and much more. These motors are commonly used for industrial applications. Even so, the usage of these motors ranges from the food industry, medical, and even the nuclear power generation.

Air motors occupy a niche as far as the sources of power are concerned. It is well suited to the applications which need a compact, lightweight source of smooth as well as vibrationless power. These motors stop and start almost instantly and could provide extremely variable torque and speed without any complicated controls. These motors operate in hot, corrosive as well as wet environments without any damage and are least affected by continuous stalling as well as overload. Apart from this, these are instantly reversible and unlike the electric motors can run cool and start without any shock. There is no heat buildup as well as electric sparks for damaging the motor.

As these are cooled constantly through the injected air so these motors would not overheat even at high speed. These motors have been a popular choice in environments where the danger of explosion exists.

If you are looking for the best quality Air motor then you can get them from us. We also deal with the two-component spray paint machine, Polyurea spraying machineandPneumatic agitator.

//Counter