transfer pump

V0803 7" 40:1 Ram-Mounted Pumps

Easy handling extremely viscous fluidCOSMOSTAR V0803 High Viscous Fluid Transfer Pump concentrates on handling high viscous materials. It guarantees a smooth handling of high viscous materials with adequate flow rate for efficient work. jQuery UI Accordion - No auto height

Features

Cosmostar V0803 provide flow rate up to 14.4 liter per minute (3.8 gpm) and operating pressures up to 320 bars.
  • High output per cycle; reduced wearing for longer life and lower repair costs
  • Large internal porting for maximum flow
  • Additional Air-Powered Ram is available for improving performance
  • Application

    • Handling heavy-to-inflowing fluids
    • without having to inject additional viscosity reducer fluids.
    • Dispensing silicone, latex or acrylic sealants
    • Dispensing greases and other lubricants
    Typical Fluids Handled
    • Sealants
    • Adhesives
    • Lubricants

    Techanical Data

    CategoryData
    Air Motor Diameter 7 inches (Flash)
    Pressure Ratio 40:1
    Maximum Fluid Working Pressure 320 Bar(4640 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate 14.4 lpm (3.8 gpm)
    Air Inlet Size 1/2 npt(f)
    Fluid Inlet Size Ram-Mounted 5G or 55G
    Fluid Outlet Size 3/4" pt
    Weight 94.5 kg

    Manual

    TBD

    P0169 10" 10:1 Transfer Pumps stars

    Durability and endurance even in the harshest environment. COSMOSTAR P0169 Transfer Pump is designed to work under the toughest condition. Built-in with 10” HULK Air Motor that generates up to 10:1 ratio output pressure, P0169 Transfer Pump is customized to transfer very viscous materials with high flow rate (up to 60 liters/minute). jQuery UI Accordion - No auto height

    Features

  • Reliable medium pressure supply
  • Pressure output capacity of 80 Bar
  • 2-ball provides pump operation for uniform flow
  • Stainless steel model available to handle various fluids
  • Application

    • Paint circulating
    • Ahesive supply
    • Fluid transfer and supply
    Typical Fluids Handled
    • Textured materials
    • Adhesives and sealants
    • Polyester
    • Solvent-borne paints
    • Water-borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Air Motor Diameter 10 inches (Hulk)
    Pressure Ratio 10:1
    Maximum Fluid Working Pressure 80 bar (1160 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate(60 CPM) 60 lpm (15.8 GPM)(
    Volume per Cycle 100 cc (
    Air Inlet Size 3/4" pt
    Fluid Inlet Size 1" or 3/4" pt
    Fluid Outlet Size 3/4 pt
    Weight 60 kg

    Manual

    TBD

    P1302 4" 5:1 Transfer Pumps stars

    Durability and endurance even in the harshest environment. Equipped with 4” ENCO Transfer Pump that generates up to 5:1 output pressure ratio, COSMOSTAR P1302 Transfer Pump is specialized to handle semi-viscous materials with flow-rate up to 8.5 liters/minute. COSMOSTAR P1302 Transfer Pump is the most affordable series of COSMOSTAR Transfer Pump and designed for low cost applications. jQuery UI Accordion - No auto height

    Features

  • Reliable medium pressure supply
  • Pressure output capacity of 40 Bar
  • 2-ball provides pump operation for uniform flow
  • Stainless steel model available to handle various fluids
  • Application

    • Paint circulating
    • Ahesive supply
    • Fluid transfer and supply
    Typical Fluids Handled
    • Textured materials
    • Adhesives and sealants
    • Polyester

    Techanical Data

    CategoryData
    Air Motor Diameter 4.0 inches (Enco)
    Pressure Ratio 5:1
    Maximum Fluid Working Pressure 40 bar (580 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate(60 CPM) 8.5 lpm (2.2 GPM)(
    Volume per Cycle 141 cc (
    Air Inlet Size 1/4 pt
    Fluid Inlet Size 1" or 3/4" pt
    Fluid Outlet Size 3/4 pt
    Weight 15.0 kg

    Manual

    TBD

    P1312 6" 10:1 Transfer Pumps stars

    Durability and endurance even in the harshest environment. COSMOSTAR P1312 Transfer Pump concentrates on handling high viscous materials. Also equipped with 6” COMPACT Transfer Pump that generates up to 10:1 output pressure ratio, P1312 Transfer Pump guarantees a smooth handling of high viscous materials with adequate flow-rate (up to 11.3 liters/minute). jQuery UI Accordion - No auto height

    Features

  • Reliable medium pressure supply
  • Pressure output capacity of 1200 PSI (83 Bar)
  • 2-ball provides pump operation for uniform flow
  • Stainless steel model available to handle various fluids
  • Application

    • Paint circulating
    • Ahesive supply
    • Fluid transfer and supply
    Typical Fluids Handled
    • Textured materials
    • Adhesives and sealants
    • Polyester

    Techanical Data

    CategoryData
    Air Motor Diameter 6.0 inches (Compact)
    Pressure Ratio 10:1
    Maximum Fluid Working Pressure 80 bar (1160 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate 11.6 lpm (3.0 GPM)(
    Air Inlet Size 1/4 pt
    Fluid Inlet Size 1" or 3/4" pt
    Fluid Outlet Size 3/4 pt
    Weight 20.0 kg

    Manual

    TBD

    P0182 6" 3:1 Transfer Pumps stars

    Durability and endurance even in the harshest environment. COSMOSTAR P0182 Transfer Pump concentrates on providing a high flow rate in transferring liquids between containers. Equipped with a 6” COMPACT air motor that generates up to 3:1 output pressure ratio, each P0182 Transfer Pump delivers up to 37.8 liters/minute, which makes COMPACT Transfer Pump ideal for jobs that require fast liquid traffic. jQuery UI Accordion - No auto height

    Features

  • Drum and stubby length models available for mounting and application flexibility
  • Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
  • Divorced air motor eliminates fluid and fume contamination, reducing maintenance
  • Stainless steel or carbon steel models available to handle various fluids
  • Application

    • Paint circulating
    • Cleaning and chemical supply
    • Fluid transfer and supply
    Typical Fluids Handled
    • Solvent-borne and waterborne fluid
    • Varnishes, enamels and lacquers
    • Cleaning fluids
    • Adhesives and sealants

    Techanical Data

    CategoryData
    Air Motor Diameter 6.0 inches (Compact)
    Pressure Ratio 3:1
    Maximum Fluid Working Pressure 24 bar (348 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate 37.8 lpm (10.0 GPM)(
    Air Inlet Size 1/4 pt
    Fluid Inlet Size 1-1/2 pt
    Fluid Outlet Size 3/4 pt
    Weight 25.0 kg

    Manual

    TBD

    P0201 2" 1:1 Transfer Pumps stars

    COSMOSTART P0201 transfer pumps provide a very high flow-rate. Equipped with 2 inch HI FLUX air motors, P0204 generate up to 15.0 iters/minute flow-rate. P0201 series are ideal for handling low-viscous materials that require fast transferring. COSMOSTART P0204 pumps are designed with compact bodies that make them easier to be plugged and used directly on drums or containers. jQuery UI Accordion - No auto height

    Features

  • Flow rates up to 15.0 liters per minute
  • Drum length versions have inlet immersed in material for quicker priming of heavier fluid
  • Immersed inlets hold prime better than non-immersed
  • Air-operated for high reliability and low cost
  • Application

    • Transfer from drum to daily tank
    • Continuous or dead end transfer
    • Low viscosity sprays adhesive supply
    • Supply pump for air spray
    Typical Fluids Handled
    • Windshield washer solvent
    • Automatic transmission fluid
    • Motor and hydraulic oil
    • General chemicals
    • Thinners and solvents
    • Light viscosity coatings

    Techanical Data

    CategoryData
    Air Motor Diameter 2.0 inches (Hi-Flux)
    Pressure Ratio 1:1
    Maximum Fluid Working Pressure 180 PSI (12.4 Bar)
    Maximum Air Input Pressure 180 PSI (1.42 Bar)
    Maximum Volume Flow Rate 4.0 GPM(15 lpm)
    Air Inlet Size 1/4 pt
    Fluid Inlet Size 1-1/2 pt
    Fluid Outlet Size 3/4 pt
    Weight 10.0 kg

    Manual

    TBD

    P0204 2.5" 2:1 Transfer Pumps stars

    COSMOSTART P0204 transfer pumps provide a very high flow-rate. Equipped with 2 inch HI FLUX air motors, P0204 generate up to 15.0 liters/minute flow-rate. P0204 series are ideal for handling low-viscous materials that require fast transferring. COSMOSTART P0204 pumps are designed with compact bodies that make them easier to be plugged and used directly on drums or containers. jQuery UI Accordion - No auto height

    Features

  • Flow rates up to 15.0 liters per minute
  • Drum length versions have inlet immersed in material for quicker priming of heavier fluid
  • Immersed inlets hold prime better than non-immersed
  • Air-operated for high reliability and low cost
  • Application

    • Transfer from drum to daily tank
    • Continuous or dead end transfer
    • Low viscosity sprays adhesive supply
    • Supply pump for air spray
    Typical Fluids Handled
    • Windshield washer solvent
    • Automatic transmission fluid
    • Motor and hydraulic oil
    • General chemicals
    • Thinners and solvents
    • Light viscosity coatings

    Techanical Data

    CategoryData
    Air Motor Diameter 2.5 inches (Hi-Flux)
    Pressure Ratio 2:1
    Maximum Fluid Working Pressure 240 PSI (16.6 Bar)
    Maximum Air Input Pressure 120 PSI (8.3 Bar)
    Maximum Volume Flow Rate 3.95 GPM(15 lpm)
    Air Inlet Size 1/4 pt
    Fluid Inlet Size 1-1/2 pt
    Fluid Outlet Size 3/4 pt
    Weight 12.0 kg

    Manual

    TBD

    V0118 10" 80:1 Chartek Ram-Mounted Pumps stars

    Easy handling extremely viscous fluids COSMOSTAR V0118 80:1 High Viscous Fluid Transfer Pump is the answer for your high viscosity flow rate applications.It offers highly reliable performance even in the harshest environment. Combination of extreme pressure ratio, high flow rate and rugged design make V0118 80:1 ideal for handling extremely viscous fluids. jQuery UI Accordion - No auto height

    Features

  • Higher pressure ratio and high flow rate
  • Maintain balance over a wide viscosity range
  • Application

    • Handling heavy-to-inflowing fluids
    • without having to inject additional viscosity reducer fluids.
    • Dispensing silicone, latex or acrylic sealants
    • Dispensing greases and other lubricants
    Typical Fluids Handled
    • Chartek 7
    • Sealants
    • Adhesives
    • Lubricants

    Techanical Data

    CategoryData
    Air Motor Diameter 10 inches (Compact)
    Pressure Ratio 80:1
    Maximum Fluid Working Pressure 7400 PSI (510 Bar)
    Maximum Air Input Pressure 92.5 PSI (6.3 Bar)
    Maximum Volume Flow Rate 8.7 GPM(2.3 lpm)
    Air Inlet Size 3/4 pt
    Fluid Inlet Size 3/4 pt
    Fluid Outlet Size 3/8" pt or 1/2" pt
    Weight 105 kg

    Video

    V0802 6" 24:1 Ram-mounted Pumps

    V0802-5G Compact 6" 24:1 Air-operated pump for high viscosity fluid jQuery UI Accordion - No auto height

    Features

    Cosmostar V0802 provide flow rate up to 2 liter per minute (0.53 gpm) and operating pressures up to 200 bars.
  • High output per cycle; reduced wearing for longer life and lower repair costs
  • Large internal porting for maximum flow
  • Additional Air-Powered Ram is available for improving performance
  • Application

    • Handling heavy-to-inflowing fluids
    • without having to inject additional viscosity reducer fluids.
    • Dispensing silicone, latex or acrylic sealants
    • Dispensing greases and other lubricants
    Typical Fluids Handled
    • Sealants
    • Adhesives
    • Lubricants

    Techanical Data

    CategoryData
    Air Motor Diameter 6 inches (Compact)
    Pressure Ratio 24:1
    Maximum Fluid Working Pressure 2400 PSI (200 Bar)
    Maximum Air Input Pressure 120 PSI (8.3 Bar)
    Maximum Volume Flow Rate 0.53 GPM(2.0 lpm)
    Air Inlet Size 1/2 npt(f)
    Fluid Inlet Size 1 npt(f)
    Fluid Outlet Size 1 npt(f)
    Weight 94.5 kg

    Manual

    TBD

    Subscribe to this RSS feed

    COSMOSTAR Diaphragm Pumps

    COSMOSTAR Air-Operated Double Diaphragm Pumps series are ideal for bulk transfer of your solvent or water-based, low to medium viscosity inks and ingredients. They offer easy maintenance with an extremely reliable patented air valve for true non-sticking operations. Air-operated double diaphragm pumps are a very efficient type of transfer pump. These pumps can handle liquids with high, medium or low viscosities. They are also designed to pump liquids that feature a considerable amount of solids. This type of pump can be constructed out of materials that can handle pumping even the most acidic chemicals. Our double diaphragm pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluid. Installed with Teflon plate at each of the diaphragm compartments, double diaphragm pump guarantees high endurance and durability.