piston pump

P0205 HI-FLUX 2” 2:1 Divorced Transfer Pump

Durability and endurance even in the harshest environment

COSMOSTAR P0205 Transfer Pump provides a very high flow-rate. Equipped with 2” HI-FLUX air motor, P0205 generates up to 12 liters/minute flow-rate. P0205 series are ideal for handling low-viscous materials that require fast transferring. COSMOSTAR P0205 pump is designed with compact body that makes it easier to be plugged and used directly on drum or container.

Feature and Benefits

  • Flow rate up to 15 liters per minute
  • Drum length versions have inlet immersed in material for quicker priming of heavier fluid
  • Immersed inlets hold prime better than non-immersed
  • Air-operated for high reliability and low cost
  • Quick-release bung adapter for easy drum removal without interference from hose connections

Technical Data

Category

Data

Air Motor Diameter

2” (HI-FLUX)

Pressure Ratio

2:1

Max. Fluid Working Pressure

25 Bar (360 PSI)

Max. Air Input Pressure

12 Bar (180 PSI)

Max. Volume Flow Rates

9.5 LPM (2.5 GPM)

Volume per Cycle

95 cc

Max. Recommended Pump Speed

100 CPM

Air Inlet Size

1/4 pt

Fluid Inlet Size

1 ½ pt

Fluid Outlet Size

3/4 pt

Dimension

1.35 m (length)

Max. Operating Temp.

82ᵒC (180ᵒF)

S0900 Air Spray Packages

High quality, fine finish spray package for wood and metal applications. S0900 is an air-operated diaphragm spray package that combines quality pumping system, rugged design and accurate regulators to produce a first rate spray finishing system. jQuery UI Accordion - No auto height

Feature and Benefits

  • High-quality-finish and low pulsation output deliver a consistent spray pattern
  • Easy-to-use, quick color changes and fast material refills save more time and money
  • Rugged construction made of stainless steel or aluminum pump handles a wide variety of fluids
  • Typical Applications

      Typical Applications
    • General coatings
    • PU coatings
    • UV special coatings
    • Water-soluble coatings for leather
    • Timbering spraying
    • Furniture spraying
    • Spraying for small-scale works
    Typical Fluids Handled
    • Dyes
    • Ink
    • Coatings
    • Solvent
    • Lubricant

    Technical Data

    CategoryData
    Pressure ratio 1:1
    Spray paint flow rates 4~5 LPM
    Air pressure operating range 2~7 kg/cm2
    Maximum pressure output 6 kg/cm2
    Maximum recommended pump speed 300cycles/minute
    Air inlet size 1/4 pt(f)
    Fluid inlet size 1/4 pt(f)

    Manual

    TBD

    D0906 1" Double Diaphragm Pumps

    <!description> Designed for high output volume per cycle, high power and performance Ideal for transferring a wide variety of fluid, D0906 offers high pumping capacity in a small package. D0906 pump guarantees high endurance and durability. <!doctype html> jQuery UI Accordion - No auto height

    Features

    • High Flow rate, deliver up to 175 liters per minute, in a small portable package
    • Clean, hands-off fluid handling
    • High performance with high mobility

    Application

    Typical Application
    • Drum transfer for fluids up 5000 cps
    • Unloading fluid
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    Fluid Outlet Size1 ptFluid Inlet Size1 pt
    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 175 LPM
    Maximum pumpable fluid viscosity 5000 CPS
    Maximum Air Consumption 1600 LPM
    Maximum Suction Lift 8.3m
    Maximum size pumpable solids 3 mm
    Air pressure operating range 2.0 - 8.0 bar
    Air Inlet Size 1/2 pt

    Manual

    TBD

    D0908 2" Double Diaphragm Pumps

    D0908 is designed to handle high viscous fluid and to deliver high flow rate. Large sized, solid, chemically-inert Teflon plates in both compartments make D0908 suitable to pump wide variety of liquid, even the most aggressive ones. jQuery UI Accordion - No auto height

    Features

  • Bigger ports for higher flow rates, up to 620 liters per minute
  • Lubrication-less operation
  • Designed for tough environments
  • Application

      Typical Application
    • Drum transfer for fluids up 10000 cps
    • Unloading fluid
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 620 LPM
    Maximum pumpable fluid viscosity 10000 CPS
    Maximum Air Consumption 5500 LPM
    Maximum Suction Lift 8.1m
    Maximum size pumpable solids 7 mm
    Air pressure operating range 2.0 - 8.0 bar
    Air Inlet Size 3/4 pt
    Fluid Outlet Size 2 pt
    Fluid Inlet Size 2 pt

    Manual

    TBD

    D0307 1 1/2" Double Diaphragm Pumps

    D0307 is designed for handling heavier, higher viscosity fluid and pumping large size solids faster. Chemically-inert Teflon plates in both compartments make D0307 suitable to pump wide variety of liquid, even the most aggressive ones. jQuery UI Accordion - No auto height

    Features

  • Larger ports for larger flow rates, up to 340 liters per minute
  • Freely lubricate operation
  • Used in various tough environment and condition
  • Application

      Typical Application
    • Drum transfer for fluids up 10000 cps
    • Unloading fluid
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 340 LPM
    Maximum pumpable fluid viscosity 10000 CPS
    Maximum Air Consumption 5500 LPM
    Maximum Suction Lift 6.1m
    Maximum size pumpable solids 7 mm
    Air pressure operating range 2.0 - 8.0 bar
    Air Inlet Size 3/4 pt
    Fluid Outlet Size 1 1/2 pt
    Fluid Inlet Size 1 1/2 pt

    Manual

    TBD

    D0903 3/4" Double Diaphragm Pumps

    The D0903 is designed for handling light to medium viscosity fluid with high flow rates up to 120 liters per minutes. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 120 liters per minute, in a small portable package
  • Clean, hands-off fluid handling
  • Quiet running, up to 85dB with easy to use remote muffler capability for even lower noise levels
  • Application

      Typical Application
    • Drum transfer for fluids up 5000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    • Cleaning fluids and detergents
    • Plating and dip tanks
    • Water treatment
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.3 bar
    Maximum Flow Delivery 120 LPM
    Maximum pumpable fluid viscosity 5000 CPS
    Maximum Air Consumption 1200 LPM
    Maximum Suction Lift 8.3m
    Maximum size pumpable solids 2 mm
    Air pressure operating range 1.5 - 8.3 bar
    Air Inlet Size 1/2 pt
    Fluid Outlet Size 3/4 pt
    Fluid Inlet Size 3/4 pt

    Manual

    TBD

    D0302 3/8" Double Diaphragm Pumps

    D0302 3/8" pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluids. Installed with Teflon plate at each of the diaphragm compartments, D0302 Pumps guarantee high endurance and durability. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 23 liters per minute, in a small portable package
  • Easy maintenance air valves and ball checks
  • Operate on as little as 20 psi (1.4bar) air pressure
  • Low noise
  • Application

      Typical Application
    • Drum transfer for fluids up 3000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 23 LPM
    Maximum pumpable fluid viscosity 3000 CPS
    Maximum Air Consumption 300 LPM
    Maximum Suction Lift 0.9 m dry, 6.3m wet
    Maximum size pumpable solids 1 mm
    Air pressure operating range 1.4 - 8.0 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 3/8 pt
    Fluid Inlet Size 3/8 pt

    Manual

    TBD

    D0902 3/8" Double Diaphragm Pumps stars

    D0902 3/8" pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluids. Installed with Teflon plate at each of the diaphragm compartments, D0902 Pumps guarantee high endurance and durability. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 23 liters per minute, in a small portable package
  • Easy maintenance air valves and ball checks
  • Operate on as little as 20 psi (1.4bar) air pressure
  • Low noise
  • Application

      Typical Application
    • Drum transfer for fluids up 3000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 23 LPM
    Maximum pumpable fluid viscosity 3000 CPS
    Maximum Air Consumption 300 LPM
    Maximum Suction Lift 0.9 m dry, 6.3m wet
    Maximum size pumpable solids 1 mm
    Air pressure operating range 1.4 - 8.0 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 3/8 pt
    Fluid Inlet Size 3/8 pt

    Manual

    TBD

    D0306 1" Double Diaphragm Pumps

    Designed for high output per cycle, high power and performance.Ideal for transferring a wide variety of fluids. D0306 offers high pumping capacity in a small package. D0306 pumps are also available with a stainless steel body, which makes them ideal to operate in highly hygienic environment. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, up to 133 liters per minute, in a small portable package
  • Clean, hands-off fluid handling
  • High performance with high mobility
  • Application

      Typical Application
    • Drum fluid transfer
    • Unloading fluids
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.3 bar
    Maximum Flow Delivery 113 LPM
    Maximum pumpable fluid viscosity 5,000 CPS
    Maximum size pumpable solids 3.2 mm(116 PSI)
    Air pressure operating range 1-8 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 1 pt
    Fluid Inlet Size 1 pt

    Manual

    TBD

    P0169 10" 10:1 Transfer Pumps stars

    Durability and endurance even in the harshest environment. COSMOSTAR P0169 Transfer Pump is designed to work under the toughest condition. Built-in with 10” HULK Air Motor that generates up to 10:1 ratio output pressure, P0169 Transfer Pump is customized to transfer very viscous materials with high flow rate (up to 60 liters/minute). jQuery UI Accordion - No auto height

    Features

  • Reliable medium pressure supply
  • Pressure output capacity of 80 Bar
  • 2-ball provides pump operation for uniform flow
  • Stainless steel model available to handle various fluids
  • Application

    • Paint circulating
    • Ahesive supply
    • Fluid transfer and supply
    Typical Fluids Handled
    • Textured materials
    • Adhesives and sealants
    • Polyester
    • Solvent-borne paints
    • Water-borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Air Motor Diameter 10 inches (Hulk)
    Pressure Ratio 10:1
    Maximum Fluid Working Pressure 80 bar (1160 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate(60 CPM) 60 lpm (15.8 GPM)(
    Volume per Cycle 100 cc (
    Air Inlet Size 3/4" pt
    Fluid Inlet Size 1" or 3/4" pt
    Fluid Outlet Size 3/4 pt
    Weight 60 kg

    Manual

    TBD

    Subscribe to this RSS feed