PEM-X1 CG – Corona Cup Gun

PEM-X1 CG – Corona Cup Gun

 

The simple handling and perfect ergonomics of WAGNER cup guns make them ideal for lab and development purposes and for powder coating individual items and very small quantities.

Features and Benefits

  • Simple plug-in principle for the cup
  • Short and safe paint change times of approximately 15 seconds
  • Funnel beaker with special geometry
  • The different slope angles ensure constant flow even with difficult powder types
  • Integrated Venturi feeding principle
  • The coating parameters are set via the control module
  • All coating-relevant parameters are saved and accessed via the fully electronic control module

Application

  • Wood finishing 
  • Ideally suited for coating geometrically complex components and surfaces, such as window units and chairs.
  • Efficient operating speed for pressure ranges up to 250 bar.
  • Improved edge coverage due to less thinning of the coating material at the edges.
  • Plastic finishing
  • Drum painting 
  • Metal furniture and fixture manufacturing 
  • General metal
  • Corrosion protection
  • Metal protection and finishing
  • Suitable for coating geometrically complex components, both for low and high surface powers.
  • Improved edge coverage due to less thinning of the coating material at the edges.
  • Excellent coating of different geometries due to formula selection on the gun.
  • Efficient operating speed for pressure ranges up to 250 bar.
  • Aerospace industry
  • Automotive components
  • Electrostatic processing of waterbased release agents for the general and automotive supply industry.
  • Ultra-fine atomization & homogeneous wetting with the lowest coating thicknesses.
  • Facilitation of workpiece removal thanks to even wetting of geometrically complex shapes.
  • Improved handling & fatigue-free work during manual coating with DN3 hoses.
  • Motorcyle parts

Typical Fluid Handled

  • Primers, protective coatings, waterborne materials and two-part urethane
  • Wash coats, glazes, top coat lacquers and catalyzed varnishes 
  • Epoxies, urethanes, air dry enamels and clear coat enamels
  • High solid materials
  • UV paints
  • Primer and top coat
Technical Data

CategoryData
OUTPUT VOLTAGE 100,0 KV
AIR INLET PRESSURE  0,3 MPA, 3,0 BAR, 44 PSI
OPERATING TEMPERATURE  5 – 45 °C, 41.0 – 113.0 °F
WEIGHT 0,6 KG, 1.2 LB.