Powder set/Spraypack manual

Powder set/Spraypack manual

 

The set consists of the central components for the installation of a powder coating system. A manual gun, a gun control unit, an injector, and a connection hose set ensure high-quality coating results.

Features and Benefits

  • Corona manual gun with an air-flushed high-performance cascade
  • Constant and reliable coating performance
  • Ergonomic and perfectly balanced gun
  • Control unit with a regulated air volume cycle
  • Fully electronic control module for repeatable results
  • Saving and accessing up to 50 coating programs

Application

  • Wood finishing 
  • Ideally suited for coating geometrically complex components and surfaces, such as window units and chairs.
  • Efficient operating speed for pressure ranges up to 250 bar.
  • Improved edge coverage due to less thinning of the coating material at the edges.
  • Plastic finishing
  • Drum painting 
  • Metal furniture and fixture manufacturing 
  • General metal
  • Corrosion protection
  • Metal protection and finishing
  • Suitable for coating geometrically complex components, both for low and high surface powers.
  • Improved edge coverage due to less thinning of the coating material at the edges.
  • Excellent coating of different geometries due to formula selection on the gun.
  • Efficient operating speed for pressure ranges up to 250 bar.
  • Aerospace industry
  • Automotive components
  • Electrostatic processing of waterbased release agents for the general and automotive supply industry.
  • Ultra-fine atomization & homogeneous wetting with the lowest coating thicknesses.
  • Facilitation of workpiece removal thanks to even wetting of geometrically complex shapes.
  • Improved handling & fatigue-free work during manual coating with DN3 hoses.
  • Motorcyle parts

Typical Fluid Handled

  • Primers, protective coatings, waterborne materials and two-part urethane
  • Wash coats, glazes, top coat lacquers and catalyzed varnishes 
  • Epoxies, urethanes, air dry enamels and clear coat enamels
  • High solid materials
  • UV paints
  • Primer and top coat
Technical Data

CategoryData
INPUT VOLTAGE 85 – 250 V
INPUT POWER 40 W
INPUT FREQUENCY 47 – 440 Hz
AIR INLET PRESSURE 0,6 – 0,8 MPa, 6,0 – 8,0 bar, 87 – 116 PSI
AIR INLET CONNECTION 8 mm
OPERATING TEMPERATURE 5 – 45 °C, 41.0 – 113.0 °F
WEIGHT 8,9 kg, 19.6 lb