TOPFINISH ROBOTBELL 1

TOPFINISH ROBOTBELL 1

 

With the high-speed rotation atomiser TOPFINISH ROBOTBELL 1, both small workpieces and large surfaces can be coated with highest efficiency. The RobotBell is ideal for electrostatic applications with water and solvent-based paints. Thanks to its versatility and robust properties, it allows perfect surface coatings in a wide range of areas - such as for workpieces in the automotive, metal, plastic or wood industry.

Features and Benefits

  • Ideal coating results with super-fine atomisation
  • High variability thanks to individual adjustment of the spray jet with two shroud airs - depending on the workpiece geometry requirements, both a wide, soft spray pattern and a small, hard spray jet can be generated
  • Minimum effort for assembly & maintenance thanks to sturdy turbine technology and components made from stainless steel

Application

  • Wood finishing 
  • Plastic finishing
  • Drum painting 
  • Metal furniture and fixture manufacturing 
  • General metal
  • Corrosion protection
  • Metal protection and finishing
  • Aerospace industry
  • Automotive components
  • Motorcyle parts

Typical Fluid Handled

  • Primers, protective coatings, waterborne materials and two-part urethane
  • Wash coats, glazes, top coat lacquers and catalyzed varnishes 
  • Epoxies, urethanes, air dry enamels and clear coat enamels
  • High solid materials
  • UV paints
  • Primer and top coat
Technical Data

CategoryData
SHAFT BEARING Air bearing
ANGLE VERSION 60°
MAXIMUM VOLTAGE 70 kV (type A) or 100 kV (type B)
NOZZLE SIZES Ø 0.8 / 1.1 / 1.4 / 1.7 mm
BELL DISC - SIZE 30 mm / 50 mm / 70 mm
BELL DISC - SERRATION smooth, straight / cross serrated
BELL DISC - MATERIAL Consistal / titanium
MATERIAL VOLUME 25 - 800 ml/min
SPRAY JET DIAMETER Approx. 70 - 800 mm
BEARING AIR PRESSURE 5.5 bar
DRIVE AIR PRESSURE 0 - 8 bar
BRAKE AIR PRESSURE 0 - 6 bar
SHROUD AIR PRESSURE 0.2 - 4.5 bar
MATERIAL PRESSURE Typically 0.5 - 2.0 bar, max. 8 bar
MATERIAL CONNECTIONS G 1/4" internal
AIR CONNECTIONS 4 / 6 / 8 mm
MAX. MATERIAL TEMPERATURE +50 °C
AMBIENT TEMPERATURE 0 °C to +40 °C
TEMPERATURE OF TURBINE AIR +15 °C to +50 °C