Ergonomic powder gun
The PEM-X 1 combines balance, maximum service life and optimum handling perfectly. Perfectly balanced ergonomics ensure flexible and fatigue-free operation. WAGNER combines first-class design and functionality to achieve a perfect surface.
Features and Benefits
- Very light gun (490g)
- Despite its light weight, the gun is impressive due to its robust design and ergonomic working without tiring
- Homogeneous and stable powder cloud
- Even layer thickness distribution
- Optimally balanced
- Perfect grip in every situation due to a gun that is balanced down to the last gram
- Quick-release coupling for the powder hose makes the paint change easier und quicker
Application
- Wood finishing
- Ideally suited for coating geometrically complex components and surfaces, such as window units and chairs.
- Efficient operating speed for pressure ranges up to 250 bar.
- Improved edge coverage due to less thinning of the coating material at the edges.
- Plastic finishing
- Drum painting
- Metal furniture and fixture manufacturing
- General metal
- Corrosion protection
- Metal protection and finishing
- Suitable for coating geometrically complex components, both for low and high surface powers.
- Improved edge coverage due to less thinning of the coating material at the edges.
- Excellent coating of different geometries due to formula selection on the gun.
- Efficient operating speed for pressure ranges up to 250 bar.
- Aerospace industry
- Automotive components
- Electrostatic processing of waterbased release agents for the general and automotive supply industry.
- Ultra-fine atomization & homogeneous wetting with the lowest coating thicknesses.
- Facilitation of workpiece removal thanks to even wetting of geometrically complex shapes.
- Improved handling & fatigue-free work during manual coating with DN3 hoses.
- Motorcyle parts
Typical Fluid Handled
- Primers, protective coatings, waterborne materials and two-part urethane
- Wash coats, glazes, top coat lacquers and catalyzed varnishes
- Epoxies, urethanes, air dry enamels and clear coat enamels
- High solid materials
- UV paints
- Primer and top coat
Technical Data
Category | Data |
---|---|
OUTPUT VOLTAGE | 100,0 KV |
AIR INLET PRESSURE | 0,3 MPA, 3,0 BAR, 44 PSI |
OPERATING TEMPERATURE | 5 – 45 °C, 41.0 – 113.0 °F |
WEIGHT | 0,5 KG, 1.1 LB. |