The set consists of the central components for the installation of a powder coating system. A manual gun, a gun control unit, an injector, and a connection hose set ensure high-quality coating results.
Features and Benefits
- Corona manual gun with an air-flushed high-performance cascade
- Constant and reliable coating performance
- Ergonomic and perfectly balanced gun
- Control unit with a regulated air volume cycle
- Fully electronic control module for repeatable results
- Saving and accessing up to 50 coating programs
Application
- Wood finishing
- Ideally suited for coating geometrically complex components and surfaces, such as window units and chairs.
- Efficient operating speed for pressure ranges up to 250 bar.
- Improved edge coverage due to less thinning of the coating material at the edges.
- Plastic finishing
- Drum painting
- Metal furniture and fixture manufacturing
- General metal
- Corrosion protection
- Metal protection and finishing
- Suitable for coating geometrically complex components, both for low and high surface powers.
- Improved edge coverage due to less thinning of the coating material at the edges.
- Excellent coating of different geometries due to formula selection on the gun.
- Efficient operating speed for pressure ranges up to 250 bar.
- Aerospace industry
- Automotive components
- Electrostatic processing of waterbased release agents for the general and automotive supply industry.
- Ultra-fine atomization & homogeneous wetting with the lowest coating thicknesses.
- Facilitation of workpiece removal thanks to even wetting of geometrically complex shapes.
- Improved handling & fatigue-free work during manual coating with DN3 hoses.
- Motorcyle parts
Typical Fluid Handled
- Primers, protective coatings, waterborne materials and two-part urethane
- Wash coats, glazes, top coat lacquers and catalyzed varnishes
- Epoxies, urethanes, air dry enamels and clear coat enamels
- High solid materials
- UV paints
- Primer and top coat
Technical Data
Category | Data |
---|---|
INPUT VOLTAGE | 85 – 250 V |
INPUT POWER | 40 W |
INPUT FREQUENCY | 47 – 440 Hz |
AIR INLET PRESSURE | 0,6 – 0,8 MPa, 6,0 – 8,0 bar, 87 – 116 PSI |
AIR INLET CONNECTION | 8 mm |
OPERATING TEMPERATURE | 5 – 45 °C, 41.0 – 113.0 °F |
WEIGHT | 8,9 kg, 19.6 lb |