Powder sets consist of the core components of application equipment, namely a control unit, guns, feed system and connection components.
Features and Benefits
- Classification according to ignition energy class A
- Simple and inexpensive fire protection concept is adequate
- Homogeneous powder cloud
- Optimized e-static for efficient powder charging
- Reduced wear
- Soft powder cloud
- Atomization selected to suit the workpiece
- Uniform film thickness distribution
Application
- Wood finishing
- Ideally suited for coating geometrically complex components and surfaces, such as window units and chairs.
- Efficient operating speed for pressure ranges up to 250 bar.
- Improved edge coverage due to less thinning of the coating material at the edges.
- Plastic finishing
- Drum painting
- Metal furniture and fixture manufacturing
- General metal
- Corrosion protection
- Metal protection and finishing
- Suitable for coating geometrically complex components, both for low and high surface powers.
- Improved edge coverage due to less thinning of the coating material at the edges.
- Excellent coating of different geometries due to formula selection on the gun.
- Efficient operating speed for pressure ranges up to 250 bar.
- Aerospace industry
- Automotive components
- Electrostatic processing of waterbased release agents for the general and automotive supply industry.
- Ultra-fine atomization & homogeneous wetting with the lowest coating thicknesses.
- Facilitation of workpiece removal thanks to even wetting of geometrically complex shapes.
- Improved handling & fatigue-free work during manual coating with DN3 hoses.
- Motorcyle parts
Typical Fluid Handled
- Primers, protective coatings, waterborne materials and two-part urethane
- Wash coats, glazes, top coat lacquers and catalyzed varnishes
- Epoxies, urethanes, air dry enamels and clear coat enamels
- High solid materials
- UV paints
- Primer and top coat
Technical Data
Category | Data |
---|---|
Length | 395 mm |
Weight | 555 g |
Build | EN 50177 |
Enclosure class | IP 54 |
Polarity | Negative |
Max. powder output | 450 g/ min. 0,99 lb/min. |