While the RobotBell can be mounted on a robot arm, the TOPFINISH Bell 1S has been especially designed for use with reciprocators and linear axes. it is ideal for electrostatic application with water and solvent based paints and can be applied for automated liquid coating in wide range of industries where high-quality surfaces are required
Features and Benefits
- Ideal coating results with super-fine atomisation
- High variability thanks to individual adjustment of the spray jet with two shroud airs - depending on the workpiece geometry requirements, both a wide, soft spray pattern and a small, hard spray jet can be generated
- Minimum effort for assembly & maintenance thanks to sturdy turbine technology and components made from stainless steel
Application
- Wood finishing
- Plastic finishing
- Drum painting
- Metal furniture and fixture manufacturing
- General metal
- Corrosion protection
- Metal protection and finishing
- Aerospace industry
- Automotive components
- Motorcyle parts
Typical Fluid Handled
- Primers, protective coatings, waterborne materials and two-part urethane
- Wash coats, glazes, top coat lacquers and catalyzed varnishes
- Epoxies, urethanes, air dry enamels and clear coat enamels
- High solid materials
- UV paints
- Primer and top coat
Technical Data
| Category | Data |
|---|---|
| SHAFT BEARING | Air bearing |
| MAXIMUM VOLTAGE | 100 kV |
| NOZZLE SIZES | Ø 0.8 / 1.1 / 1.4 / 1.7 mm |
| BELL DISC - SIZE | 30 mm / 50 mm / 70 mm |
| BELL DISC - SERRATION | smooth, straight / cross serrated |
| BELL DISC - MATERIAL | Consistal / titanium |
| MATERIAL VOLUME | 25 - 800 ml/min |
| SPRAY JET DIAMETER | Approx. 70 - 800 mm |
| BEARING AIR PRESSURE | 5.5 bar |
| WEIGHT | 4 kg (1 colour) |
| VALVE DISC (NUMBER OF COLOURS) | 1 / 2 / 4 |
| DRIVE AIR PRESSURE | 0 - 8 bar |
| BRAKE AIR PRESSURE | 0 - 6 bar |
| SHROUD AIR PRESSURE | 0.2 - 4.5 bar |
| MATERIAL PRESSURE | Typically 0.5 - 2.0 bar, max. 8 bar |
| MATERIAL CONNECTIONS | G 1/4" internal |
| AIR CONNECTIONS | 4 / 6 / 8 mm |
| MAX. MATERIAL TEMPERATURE | +50 °C |
| AMBIENT TEMPERATURE | 0 °C to +40 °C |
| TEMPERATURE OF TURBINE AIR | +15 °C to +50 °C |