Displaying items by tag: plural component sprayer
火, 05 1月 2016 03:56
SD100 Plural Component Pump
COSMOSTAR SD100 - 68:1 - Mixing Ratio 1:1 Plural Component Sprayer.
jQuery UI Accordion - No auto height
Two and three-lower designs achieve a wide variety of mix ratios
Two-lower design for a consistent 1:1 mix ratio
Reduces material and solvent waste
Provides accurately mixed and propotioned material on demand
Features
The Cosmostar Plural-Component Sprayer provides the high pressure performance you need to spray high viscosity fluid and high solid coatings. In addition, the unit is designed to gravity feed, which may eliminate the need for feed pumps to your cost.
Application
- Plural component materials
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 10 inches (HULK) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 68:1 |
| Maximum Fluid Working Pressure | 7250 PSI (500 Bar) |
| Maximum Air Input Pressure | 106 PSI (7.5 Bar) |
| Maximum Volume Flow Rate | 8.4 LPM (2.2 GPM) | Air Inlet Size | 3/4 npt(f) | Fluid Inlet Size | 3/4 npt(f) |
| Fluid Outlet Size | 3/8 npt(f) |
| Maximum Operating Temperature | 180F (82C) |
Manual
Published in
Plural Component Sprayer
火, 01 9月 2015 12:38
SD60 Plural Component Sprayer
For spraying PU foam application, COSMOSTAR SD60 24:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment.
jQuery UI Accordion - No auto height
Two and three-lower designs achieve a wide variety of mix ratios
Two-lower design for a consistent 1:1 mix ratio
Reduces material and solvent waste
Provides accurately mixed and propotioned material on demand
Features
Equipped with two positive displacements can provide the most reliable mixing ratio and Compact 6" can always achieve your expectation about fluid atomization.
Application
- Plural component materials
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 6 inches (COMPACT) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 24:1 |
| Maximum Fluid Working Pressure | 2880 PSI (200 Bar) |
| Maximum Air Input Pressure | 120 PSI (8.3 Bar) |
| Maximum Volume Flow Rate | 3.8 LPM (1.0 GPM) | Air Inlet Size | 3/4 npt(f) | Fluid Inlet Size | 3/4 npt(f) |
| Fluid Outlet Size | 3/8 npt(f) |
| Maximum Operating Temperature | 180F (82C) |
Manual
TBD
Published in
Plural Component Sprayer
火, 01 9月 2015 07:46
SD70 Plural Component Pump
Tough designed sprayer for overall industrial protective coatings
COSMOSTAR SD70 flash 7” Air Motor, 34:1 Pressure Ratio with two cylinders (lowers), mixing ratio 1:1.
jQuery UI Accordion - No auto height
Two and three-lower designs achieve a wide variety of mix ratios
Two-lower design for a consistent 1:1 mix ratio
Reduces material and solvent waste
Provides accurately mixed and propotioned material on demand
Features
For spraying PU foam application, COSMOSTAR SD70 34:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Flash 7” can always achieve your expectation of fluid atomization.
Features and Benefits
Application
- Plural component materials
- Off-shore
- Protective coatings
- Public works facilities
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 7 inches (Flash) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 34:1 |
| Maximum Fluid Working Pressure | 4080 PSI (281 Bar) |
| Maximum Air Input Pressure | 120 PSI (8.3 Bar) |
| Maximum Volume Flow Rate | 10.2 LPM (2.68 GPM) | Air Inlet Size | 3/4 npt(f) | Fluid Inlet Size | 3/4 npt(f) |
| Fluid Outlet Size | 3/8 npt(f) |
| Maximum Operating Temperature | 180F (82C) |
Manual
TBD
Published in
Plural Component Sprayer