Displaying items by tag: Cosmostar sprayer
AX0117 ATLAS 70:1 Pneumatic Airless Sprayer
The new COSMOSTAR ATLAS 10 inch series with new outlook and more powerful pump. Our new technology and high quality pump gives you a great performance and powerful pump.
ATLAS pump is easy to assemble and disassemble which really helpful when doing maintenance and troubleshooting.The new COSMOSTAR ATLAS 10 inch series with new outlook and more powerful pump. Our new technology and high quality pump gives you a great performance and powerful pump.
ATLAS pump is easy to assemble and disassemble which really helpful when doing maintenance and troubleshooting. COSMOSTAR ATLAS is highly reliable and suited in the harshest environment. It can handle extremely viscous fluids which needed extreme pressure ratio, and high flow rate.
COSMOSTAR ATLAS Airless Sprayer with high quality motor and pump is the answer for your heavy-duty spray applications.
A0110 10" 45:1 Pneumatic Airless Sprayer
It takes a tough sprayer to handle a tough job COSMOSTAR Hulk Airless Sprayers / Airless Paint Sprayers offer highly reliable performance even in the harshest environment.
Combination of extreme pressure ratio, high flow rate and rugged design make COSMOSTAR Hulk Airless Sprayers ideal for handling extremely viscous fluids.
COSMOSTAR Hulk Airless Sprayer is the answer for your heavy-duty spray applications.
A0116 10" 70:1 Pneumatic Airless Sprayer
It takes a tough sprayer to handle a tough job COSMOSTAR Hulk Airless Sprayers / Airless Paint Sprayers offer highly reliable performance even in the harshest environment.
Combination of extreme pressure ratio, high flow rate and rugged design make COSMOSTAR Hulk Airless Sprayers ideal for handling extremely viscous fluids.
COSMOSTAR Hulk Airless Sprayer is the answer for your heavy-duty spray applications.
PF100 Plural Component Pump
Features
For spraying PU foam application, COSMOSTAR PF100 50:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Hulk 10” can always achieve your expectation of fluid atomization.
Features and Benefits
Application
- Plural component materials
- Off-shore
- Protective coatings
- Public works facilities
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 10 inches (Flash) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 50:1 |
| Maximum Fluid Working Pressure | 5000 PSI (350 Bar) |
| Maximum Air Input Pressure | 100 PSI (6.9 Bar) |
| Maximum Volume Flow Rate | 13.5 LPM (3.5 GPM) | Air Inlet Size | 3/4 pt | Fluid Inlet Size | 3/4 pt |
| Fluid Outlet Size | 1/4 pt or 3/8 pt |
| Maximum Operating Temperature | 180F (82C) |
Manual
TBD
PF70 Plural Component Pump
Features
For spraying PU foam application, COSMOSTAR PF70 34:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Flash 7” can always achieve your expectation of fluid atomization.
Features and Benefits
Application
- Plural component materials
- Off-shore
- Protective coatings
- Public works facilities
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 7 inches (Flash) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 34:1 |
| Maximum Fluid Working Pressure | 4080 PSI (281 Bar) |
| Maximum Air Input Pressure | 120 PSI (8.3 Bar) |
| Maximum Volume Flow Rate | 10.2 LPM (2.68 GPM) | Air Inlet Size | 3/4 npt(f) | Fluid Inlet Size | 3/4 npt(f) |
| Fluid Outlet Size | 3/8 npt(f) |
| Maximum Operating Temperature | 180F (82C) |
Manual
TBD
PF60 Plural Component Sprayer
Features
Equipped with two positive displacements can provide the most reliable mixing ratio and Compact 6" can always achieve your expectation about fluid atomization.
Application
- Plural component materials
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 6 inches (COMPACT) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 24:1 |
| Maximum Fluid Working Pressure | 2880 PSI (200 Bar) |
| Maximum Air Input Pressure | 120 PSI (8.3 Bar) |
| Maximum Volume Flow Rate | 3.8 LPM (1.0 GPM) | Air Inlet Size | 3/4 npt(f) | Fluid Inlet Size | 3/4 npt(f) |
| Fluid Outlet Size | 3/8 npt(f) |
| Maximum Operating Temperature | 180F (82C) |
Manual
TBD
SD100 Plural Component Pump
Features
The Cosmostar Plural-Component Sprayer provides the high pressure performance you need to spray high viscosity fluid and high solid coatings. In addition, the unit is designed to gravity feed, which may eliminate the need for feed pumps to your cost.
Application
- Plural component materials
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 10 inches (HULK) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 68:1 |
| Maximum Fluid Working Pressure | 7250 PSI (500 Bar) |
| Maximum Air Input Pressure | 106 PSI (7.5 Bar) |
| Maximum Volume Flow Rate | 8.4 LPM (2.2 GPM) | Air Inlet Size | 3/4 npt(f) | Fluid Inlet Size | 3/4 npt(f) |
| Fluid Outlet Size | 3/8 npt(f) |
| Maximum Operating Temperature | 180F (82C) |
Manual
SD60 Plural Component Sprayer
Features
Equipped with two positive displacements can provide the most reliable mixing ratio and Compact 6" can always achieve your expectation about fluid atomization.
Application
- Plural component materials
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 6 inches (COMPACT) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 24:1 |
| Maximum Fluid Working Pressure | 2880 PSI (200 Bar) |
| Maximum Air Input Pressure | 120 PSI (8.3 Bar) |
| Maximum Volume Flow Rate | 3.8 LPM (1.0 GPM) | Air Inlet Size | 3/4 npt(f) | Fluid Inlet Size | 3/4 npt(f) |
| Fluid Outlet Size | 3/8 npt(f) |
| Maximum Operating Temperature | 180F (82C) |
Manual
TBD
SD70 Plural Component Pump
Features
For spraying PU foam application, COSMOSTAR SD70 34:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Flash 7” can always achieve your expectation of fluid atomization.
Features and Benefits
Application
- Plural component materials
- Off-shore
- Protective coatings
- Public works facilities
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 7 inches (Flash) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 34:1 |
| Maximum Fluid Working Pressure | 4080 PSI (281 Bar) |
| Maximum Air Input Pressure | 120 PSI (8.3 Bar) |
| Maximum Volume Flow Rate | 10.2 LPM (2.68 GPM) | Air Inlet Size | 3/4 npt(f) | Fluid Inlet Size | 3/4 npt(f) |
| Fluid Outlet Size | 3/8 npt(f) |
| Maximum Operating Temperature | 180F (82C) |
Manual
TBD