Displaying items by tag: transfer pump
金, 21 9月 2018 08:15
V0810 6" 20:1 High Viscous Fluid Transfer Pump
Cosmostar V0810 provide flow rate up to 4.5 liter per minute (1.2 gpm) and operating pressures up to 248 bars.
- High output per cycle; reduced wearing for longer life and lower repair costs
- Large internal porting for maximum flow
- Additional Air-Powered Ram is available for improving performance
Application
- Handling heavy-to-inflowing fluids
- No additional viscosity reducer fluid needed when handling heavy-to-flow fluids
- Dispensing silicone, latex or acrylic sealants
- Dispensing greases and other lubricants
Typical Fluids Handled
- Sealants
- Adhesives
- Lubricants
- Inks
- Mastics
Techanical Data
Air Inlet Size1/4 pt
| Category | Data |
|---|---|
| Air Motor Diameter | 6 inches (Compact) |
| Pressure Ratio | 20:1 |
| Maximum Fluid Working Pressure | 3600 PSI (248 Bar) |
| Maximum Air Input Pressure | 120 PSI (8.3 Bar) |
| Maximum Volume Flow Rate | 1.2 GPM(4.5 lpm) |
| Fluid Outlet Size | 3/4 pt |
| Weight | 30 kg (Bare Pump) |
Manual
TBD
Published in
Sealant Piston Pumps
火, 31 10月 2017 02:18
宇星 P0204 2.5" 2:1 移送ポンプ
P0201/P0 205２ポンプは、たとえ粘性の高い材料であっても、どのような環境でもその性能を維持します。宇星1:1/ 2:1 移送ポンプで、スプレーにより多くの時間を費やして、メンテナンス時間をより少なく出来ます。
jQuery UI Accordion - No auto height
均等な供給圧と流量で信頼の結果
どのような環境温度でも、粘度の高い材料における圧力損失を低減
優れた耐久性のポンプ － 耐久性と少ないメンテナンスのための設計
ホースの接続に邪魔されずに、ドラムから簡単に取り外しできるクイック・リリース式バング・アダプタ
ステンレス鋼製の接液部品で耐食性
メンテナンスの手間を省く高性能のPTEFシール
特長
用途
- Transfer from drum to daily tank
- Continuous or dead end transfer
- Low viscosity sprays adhesive supply
- Supply pump for air spray
Typical Fluids Handled
- Windshield washer solvent
- Automatic transmission fluid
- Motor and hydraulic oil
- General chemicals
- Thinners and solvents
- Light viscosity coatings
技術情報
| Category | Data |
|---|---|
| Air Motor Diameter | 2.5 inches (Hi-Flux) |
| Pressure Ratio | 2:1 |
| Maximum Fluid Working Pressure | 240 PSI (16.6 Bar) |
| Maximum Air Input Pressure | 120 PSI (8.3 Bar) |
| Maximum Volume Flow Rate | 3.95 GPM(15 lpm) | Air Inlet Size | 1/4 pt | Fluid Inlet Size | 1-1/2 pt |
| Fluid Outlet Size | 3/4 pt |
| Weight | 12.0 kg |
Manual
TBD
Published in
空気圧移送ポンプ
火, 31 10月 2017 02:18
宇星 P0201 2" 1:1 移送ポンプ
P0201/P0 205２ポンプは、たとえ粘性の高い材料であっても、どのような環境でもその性能を維持します。宇星1:1/ 2:1 移送ポンプで、スプレーにより多くの時間を費やして、メンテナンス時間をより少なく出来ます。
jQuery UI Accordion - No auto height
均等な供給圧と流量で信頼の結果
どのような環境温度でも、粘度の高い材料における圧力損失を低減
優れた耐久性のポンプ － 耐久性と少ないメンテナンスのための設計
ホースの接続に邪魔されずに、ドラムから簡単に取り外しできるクイック・リリース式バング・アダプタ
ステンレス鋼製の接液部品で耐食性
メンテナンスの手間を省く高性能のPTEFシール
特長
用途
- 中粘度物質の移送
- 低粘度物質の移送
Typical Fluids Handled
- Windshield washer solvent
- Automatic transmission fluid
- Motor and hydraulic oil
- General chemicals
- Thinners and solvents
- Light viscosity coatings
技術情報
| Category | Data |
|---|---|
| Air Motor Diameter | 2.0 inches (Hi-Flux) |
| Pressure Ratio | 1:1 |
| Maximum Fluid Working Pressure | 180 PSI (12.4 Bar) |
| Maximum Air Input Pressure | 180 PSI (1.42 Bar) |
| Maximum Volume Flow Rate | 4.0 GPM(15 lpm) | Air Inlet Size | 1/4 pt | Fluid Inlet Size | 1-1/2 pt |
| Fluid Outlet Size | 3/4 pt |
| Weight | 10.0 kg |
Manual
TBD
Published in
空気圧移送ポンプ
火, 31 10月 2017 02:18
宇星 P0182 6" 3:1 移送ポンプ
低せん断循環ポンプ，低サイクルレートで動作しながら大流量の要件を処理。高容量循環ポンプは、低サイクルレートで動作しながら、大流量の要件を処理できるようにします。 ポンプ下部構造は、1ガロンあたり、より少ないサイクルを必要とし、次のシール交換が必要になるまでの時間を延ばします。
jQuery UI Accordion - No auto height
優れた耐摩耗性と耐腐食性
様々な液体に対応したステンレススチールおよび炭素鋼接液面
高粘度液体の優れたプライミングや処理の大部分
維持費の削減
Features
用途
- Paint circulating
- Cleaning and chemical supply
- Fluid transfer and supply
材料
- Solvent-borne and waterborne fluid
- Varnishes, enamels and lacquers
- Cleaning fluids
- Adhesives and sealants
技術情報
| Category | Data |
|---|---|
| Air Motor Diameter | 6.0 inches (Compact) |
| Pressure Ratio | 3:1 |
| Maximum Fluid Working Pressure | 24 bar (348 PSI) |
| Maximum Air Input Pressure | 8 Bar (116 PSI) |
| Maximum Volume Flow Rate | 37.8 lpm (10.0 GPM)( | Air Inlet Size | 1/4 pt | Fluid Inlet Size | 1-1/2 pt |
| Fluid Outlet Size | 3/4 pt |
| Weight | 25.0 kg |
Manual
TBD
Published in
空気圧移送ポンプ
火, 31 10月 2017 02:18
宇星 P01312 6" 10:1 移送ポンプ
低せん断循環ポンプ，低サイクルレートで動作しながら大流量の要件を処理。高容量循環ポンプは、低サイクルレートで動作しながら、大流量の要件を処理できるようにします。 ポンプ下部構造は、1ガロンあたり、より少ないサイクルを必要とし、次のシール交換が必要になるまでの時間を延ばします。
jQuery UI Accordion - No auto height
優れた耐摩耗性と耐腐食性
様々な液体に対応したステンレススチールおよび炭素鋼接液面
高粘度液体の優れたプライミングや処理の大部分
維持費の削減
Features
Application
- Paint circulating
- Ahesive supply
- Fluid transfer and supply
Typical Fluids Handled
- Textured materials
- Adhesives and sealants
- Polyester
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 6.0 inches (Compact) |
| Pressure Ratio | 10:1 |
| Maximum Fluid Working Pressure | 80 bar (1160 PSI) |
| Maximum Air Input Pressure | 8 Bar (116 PSI) |
| Maximum Volume Flow Rate | 11.6 lpm (3.0 GPM)( | Air Inlet Size | 1/4 pt | Fluid Inlet Size | 1" or 3/4" pt |
| Fluid Outlet Size | 3/4 pt |
| Weight | 20.0 kg |
Manual
TBD
Published in
空気圧移送ポンプ
火, 31 10月 2017 02:18
宇星 P01302 4" 5:1 移送ポンプ
低せん断循環ポンプ，低サイクルレートで動作しながら大流量の要件を処理。高容量循環ポンプは、低サイクルレートで動作しながら、大流量の要件を処理できるようにします。 ポンプ下部構造は、1ガロンあたり、より少ないサイクルを必要とし、次のシール交換が必要になるまでの時間を延ばします。
jQuery UI Accordion - No auto height
優れた耐摩耗性と耐腐食性
様々な液体に対応したステンレススチールおよび炭素鋼接液面
高粘度液体の優れたプライミングや処理の大部分
維持費の削減
Features
Application
- Paint circulating
- Ahesive supply
- Fluid transfer and supply
Typical Fluids Handled
- Textured materials
- Adhesives and sealants
- Polyester
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 4.0 inches (Enco) |
| Pressure Ratio | 5:1 |
| Maximum Fluid Working Pressure | 40 bar (580 PSI) |
| Maximum Air Input Pressure | 8 Bar (116 PSI) |
| Maximum Volume Flow Rate(60 CPM) | 8.5 lpm (2.2 GPM)( |
| Volume per Cycle | 141 cc ( | Air Inlet Size | 1/4 pt | Fluid Inlet Size | 1" or 3/4" pt |
| Fluid Outlet Size | 3/4 pt |
| Weight | 15.0 kg |
Manual
TBD
Published in
空気圧移送ポンプ
木, 19 10月 2017 03:54
宇星 P0169 10" 10:1 移送ポンプ
実証済み宇星 Hulk および 移送ポンプ テクノロジは、最高のコストパフォーマンスを提供します– 少ない部品点数、迅速な修理および長期に渡る耐久性。
(up to 60 liters/minute).
jQuery UI Accordion - No auto height
均等な供給圧と流量で信頼の結果
どのような環境温度でも、粘度の高い材料における圧力損失を低減
優れた耐久性のポンプ － 耐久性と少ないメンテナンスのための設計
ステンレス鋼製の接液部品で耐食性
メンテナンスの手間を省く高性能のPTEFシール
Features
Application
- Paint circulating
- Ahesive supply
- Fluid transfer and supply
Typical Fluids Handled
- Textured materials
- Adhesives and sealants
- Polyester
- Solvent-borne paints
- Water-borne paints
- Acid catalyzed varnishes, enamels and lacquers
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 10 inches (Hulk) |
| Pressure Ratio | 10:1 |
| Maximum Fluid Working Pressure | 80 bar (1160 PSI) |
| Maximum Air Input Pressure | 8 Bar (116 PSI) |
| Maximum Volume Flow Rate(60 CPM) | 60 lpm (15.8 GPM)( |
| Volume per Cycle | 100 cc ( | Air Inlet Size | 3/4" pt | Fluid Inlet Size | 1" or 3/4" pt |
| Fluid Outlet Size | 3/4 pt |
| Weight | 60 kg |
Manual
TBD
Published in
空気圧移送ポンプ
月, 04 7月 2016 07:34
D0906 1" Double Diaphragm Pumps
<!description> Designed for high output volume per cycle, high power and performance Ideal for transferring a wide variety of fluid, D0906 offers high pumping capacity in a small package. D0906 pump guarantees high endurance and durability. <!doctype html> jQuery UI Accordion - No auto height
Features
- High Flow rate, deliver up to 175 liters per minute, in a small portable package
- Clean, hands-off fluid handling
- High performance with high mobility
Application
Typical Application
- Drum transfer for fluids up 5000 cps
- Unloading fluid
- Chemical evacuation
Typical Fluids Handled
- Chemicals
- Contaminated surface water
- Adhesives, varnishes, dispersions, solvents and stains
- Resins, latexes, wood preservative stains, concrete paints and primers
Techanical Data
Fluid Outlet Size1 ptFluid Inlet Size1 pt
| Category | Data |
|---|---|
| Maximum Fluid Working Pressure | 8.0 bar |
| Maximum Flow Delivery | 175 LPM |
| Maximum pumpable fluid viscosity | 5000 CPS |
| Maximum Air Consumption | 1600 LPM |
| Maximum Suction Lift | 8.3m |
| Maximum size pumpable solids | 3 mm |
| Air pressure operating range | 2.0 - 8.0 bar |
| Air Inlet Size | 1/2 pt |
Manual
TBD
Published in
Diaphragm Pumps
月, 04 7月 2016 06:51
D0908 2" Double Diaphragm Pumps
D0908 is designed to handle high viscous fluid and to deliver high flow rate. Large sized, solid, chemically-inert Teflon plates in both compartments make D0908 suitable to pump wide variety of liquid, even the most aggressive ones.
jQuery UI Accordion - No auto height
Bigger ports for higher flow rates, up to 620 liters per minute
Lubrication-less operation
Designed for tough environments
Features
Application
Typical Application
- Drum transfer for fluids up 10000 cps
- Unloading fluid
- Chemical evacuation
Typical Application
Typical Fluids Handled
- Chemicals
- Contaminated surface water
- Adhesives, varnishes, dispersions, solvents and stains
- Resins, latexes, wood preservative stains, concrete paints and primers
Techanical Data
| Category | Data |
|---|---|
| Maximum Fluid Working Pressure | 8.0 bar |
| Maximum Flow Delivery | 620 LPM |
| Maximum pumpable fluid viscosity | 10000 CPS |
| Maximum Air Consumption | 5500 LPM |
| Maximum Suction Lift | 8.1m |
| Maximum size pumpable solids | 7 mm |
| Air pressure operating range | 2.0 - 8.0 bar |
| Air Inlet Size | 3/4 pt | Fluid Outlet Size | 2 pt | Fluid Inlet Size | 2 pt |
Manual
TBD
Published in
Diaphragm Pumps
金, 01 7月 2016 10:00
D0307 1 1/2" Double Diaphragm Pumps
D0307 is designed for handling heavier, higher viscosity fluid and pumping large size solids faster. Chemically-inert Teflon plates in both compartments make D0307 suitable to pump wide variety of liquid, even the most aggressive ones.
jQuery UI Accordion - No auto height
Larger ports for larger flow rates, up to 340 liters per minute
Freely lubricate operation
Used in various tough environment and condition
Features
Application
Typical Application
- Drum transfer for fluids up 10000 cps
- Unloading fluid
- Chemical evacuation
Typical Application
Typical Fluids Handled
- Chemicals
- Contaminated surface water
- Adhesives, varnishes, dispersions, solvents and stains
- Resins, latexes, wood preservative stains, concrete paints and primers
Techanical Data
| Category | Data |
|---|---|
| Maximum Fluid Working Pressure | 8.0 bar |
| Maximum Flow Delivery | 340 LPM |
| Maximum pumpable fluid viscosity | 10000 CPS |
| Maximum Air Consumption | 5500 LPM |
| Maximum Suction Lift | 6.1m |
| Maximum size pumpable solids | 7 mm |
| Air pressure operating range | 2.0 - 8.0 bar |
| Air Inlet Size | 3/4 pt | Fluid Outlet Size | 1 1/2 pt | Fluid Inlet Size | 1 1/2 pt |
Manual
TBD
Published in
Diaphragm Pumps