Displaying items by tag: transfer pump
金, 01 7月 2016 09:35
D0903 3/4" Double Diaphragm Pumps
The D0903 is designed for handling light to medium viscosity fluid with high flow rates up to 120 liters per minutes.
jQuery UI Accordion - No auto height
High Flow rate, deliver up to 120 liters per minute, in a small portable package
Clean, hands-off fluid handling
Quiet running, up to 85dB with easy to use remote muffler capability for even lower noise levels
Features
Application
Typical Application
- Drum transfer for fluids up 5000 cps
- Circulation of low viscosity inks, stains and dyes
- Waste fluid removal
- Low viscosity adhesive supply
- Cleaning fluids and detergents
- Plating and dip tanks
- Water treatment
Typical Application
Typical Fluids Handled
- Waterborne paints
- Solvent borne paints
- Acid catalyzed varnishes, enamels and lacquers
Techanical Data
| Category | Data |
|---|---|
| Maximum Fluid Working Pressure | 8.3 bar |
| Maximum Flow Delivery | 120 LPM |
| Maximum pumpable fluid viscosity | 5000 CPS |
| Maximum Air Consumption | 1200 LPM |
| Maximum Suction Lift | 8.3m |
| Maximum size pumpable solids | 2 mm |
| Air pressure operating range | 1.5 - 8.3 bar |
| Air Inlet Size | 1/2 pt | Fluid Outlet Size | 3/4 pt | Fluid Inlet Size | 3/4 pt |
Manual
TBD
Published in
Diaphragm Pumps
金, 01 7月 2016 09:12
D0302 3/8" Double Diaphragm Pumps
D0302 3/8" pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluids. Installed with Teflon plate at each of the diaphragm compartments, D0302 Pumps guarantee high endurance and durability.
jQuery UI Accordion - No auto height
High Flow rate, deliver up to 23 liters per minute, in a small portable package
Easy maintenance air valves and ball checks
Operate on as little as 20 psi (1.4bar) air pressure
Low noise
Features
Application
Typical Application
- Drum transfer for fluids up 3000 cps
- Circulation of low viscosity inks, stains and dyes
- Waste fluid removal
- Low viscosity adhesive supply
Typical Application
Typical Fluids Handled
- Waterborne paints
- Solvent borne paints
- Acid catalyzed varnishes, enamels and lacquers
Techanical Data
| Category | Data |
|---|---|
| Maximum Fluid Working Pressure | 8.0 bar |
| Maximum Flow Delivery | 23 LPM |
| Maximum pumpable fluid viscosity | 3000 CPS |
| Maximum Air Consumption | 300 LPM |
| Maximum Suction Lift | 0.9 m dry, 6.3m wet |
| Maximum size pumpable solids | 1 mm |
| Air pressure operating range | 1.4 - 8.0 bar |
| Air Inlet Size | 1/4 pt | Fluid Outlet Size | 3/8 pt | Fluid Inlet Size | 3/8 pt |
Manual
TBD
Published in
Diaphragm Pumps
金, 01 7月 2016 08:19
D0902 3/8" Double Diaphragm Pumps
D0902 3/8" pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluids. Installed with Teflon plate at each of the diaphragm compartments, D0902 Pumps guarantee high endurance and durability.
jQuery UI Accordion - No auto height
High Flow rate, deliver up to 23 liters per minute, in a small portable package
Easy maintenance air valves and ball checks
Operate on as little as 20 psi (1.4bar) air pressure
Low noise
Features
Application
Typical Application
- Drum transfer for fluids up 3000 cps
- Circulation of low viscosity inks, stains and dyes
- Waste fluid removal
- Low viscosity adhesive supply
Typical Application
Typical Fluids Handled
- Waterborne paints
- Solvent borne paints
- Acid catalyzed varnishes, enamels and lacquers
Techanical Data
| Category | Data |
|---|---|
| Maximum Fluid Working Pressure | 8.0 bar |
| Maximum Flow Delivery | 23 LPM |
| Maximum pumpable fluid viscosity | 3000 CPS |
| Maximum Air Consumption | 300 LPM |
| Maximum Suction Lift | 0.9 m dry, 6.3m wet |
| Maximum size pumpable solids | 1 mm |
| Air pressure operating range | 1.4 - 8.0 bar |
| Air Inlet Size | 1/4 pt | Fluid Outlet Size | 3/8 pt | Fluid Inlet Size | 3/8 pt |
Manual
TBD
Published in
Diaphragm Pumps
金, 01 7月 2016 06:46
D0306 1" Double Diaphragm Pumps
Designed for high output per cycle, high power and performance.Ideal for transferring a wide variety of fluids. D0306 offers high pumping capacity in a small package. D0306 pumps are also available with a stainless steel body, which makes them ideal to operate in highly hygienic environment.
jQuery UI Accordion - No auto height
High Flow rate, up to 133 liters per minute, in a small portable package
Clean, hands-off fluid handling
High performance with high mobility
Features
Application
Typical Application
- Drum fluid transfer
- Unloading fluids
- Chemical evacuation
Typical Application
Typical Fluids Handled
- Chemicals
- Contaminated surface water
- Adhesives, varnishes, dispersions, solvents and stains
- Resins, latexes, wood preservative stains, concrete paints and primers
Techanical Data
| Category | Data |
|---|---|
| Maximum Fluid Working Pressure | 8.3 bar |
| Maximum Flow Delivery | 113 LPM |
| Maximum pumpable fluid viscosity | 5,000 CPS |
| Maximum size pumpable solids | 3.2 mm(116 PSI) |
| Air pressure operating range | 1-8 bar |
| Air Inlet Size | 1/4 pt | Fluid Outlet Size | 1 pt | Fluid Inlet Size | 1 pt |
Manual
TBD
Published in
Diaphragm Pumps
日, 29 5月 2016 07:30
V0801 10" 55:1 Ram-Mounted Pumps
Easy handling extremely viscous fluidCOSMOSTAR V0801 High Viscous Fluid Transfer Pump concentrates on handling high viscous materials. It guarantees a smooth handling of high viscous materials with adequate flow rate for efficient work.
jQuery UI Accordion - No auto height
High output per cycle; reduced wearing for longer life and lower repair costs
Large internal porting for maximum flow
Additional Air-Powered Ram is available for improving performance
Features
Cosmostar V0803 provide flow rate up to 14.4 liter per minute (3.8 gpm) and operating pressures up to 440 bars.
Application
- Handling heavy-to-inflowing fluids
- without having to inject additional viscosity reducer fluids.
- Dispensing silicone, latex or acrylic sealants
- Dispensing greases and other lubricants
Typical Fluids Handled
- Sealants
- Adhesives
- Lubricants
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 10 inches (Hulk) |
| Pressure Ratio | 55:1 |
| Maximum Fluid Working Pressure | 440 Bar(6380 PSI) |
| Maximum Air Input Pressure | 8 Bar (116 PSI) |
| Maximum Volume Flow Rate | 14.4 lpm (3.8 gpm) | Air Inlet Size | 3/4 pt | Fluid Inlet Size | Ram-Mounted 5G or 55G |
| Fluid Outlet Size | 3/4" pt |
| Weight | 160 kg (55G)/ 110 kg(5G) |
Manual
TBD
Published in
Sealant Piston Pumps
日, 29 5月 2016 07:15
V0803 7" 40:1 Ram-Mounted Pumps
Easy handling extremely viscous fluidCOSMOSTAR V0803 High Viscous Fluid Transfer Pump concentrates on handling high viscous materials. It guarantees a smooth handling of high viscous materials with adequate flow rate for efficient work.
jQuery UI Accordion - No auto height
High output per cycle; reduced wearing for longer life and lower repair costs
Large internal porting for maximum flow
Additional Air-Powered Ram is available for improving performance
Features
Cosmostar V0803 provide flow rate up to 14.4 liter per minute (3.8 gpm) and operating pressures up to 320 bars.
Application
- Handling heavy-to-inflowing fluids
- without having to inject additional viscosity reducer fluids.
- Dispensing silicone, latex or acrylic sealants
- Dispensing greases and other lubricants
Typical Fluids Handled
- Sealants
- Adhesives
- Lubricants
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 7 inches (Flash) |
| Pressure Ratio | 40:1 |
| Maximum Fluid Working Pressure | 320 Bar(4640 PSI) |
| Maximum Air Input Pressure | 8 Bar (116 PSI) |
| Maximum Volume Flow Rate | 14.4 lpm (3.8 gpm) | Air Inlet Size | 1/2 npt(f) | Fluid Inlet Size | Ram-Mounted 5G or 55G |
| Fluid Outlet Size | 3/4" pt |
| Weight | 94.5 kg |
Manual
TBD
Published in
Sealant Piston Pumps
日, 29 5月 2016 04:37
P0169 10" 10:1 Transfer Pumps
Durability and endurance even in the harshest environment. COSMOSTAR P0169 Transfer Pump is designed to work under the toughest condition. Built-in with 10” HULK Air Motor that generates up to 10:1 ratio output pressure, P0169 Transfer Pump is customized to transfer very viscous materials with high flow rate (up to 60 liters/minute).
jQuery UI Accordion - No auto height
Reliable medium pressure supply
Pressure output capacity of 80 Bar
2-ball provides pump operation for uniform flow
Stainless steel model available to handle various fluids
Features
Application
- Paint circulating
- Ahesive supply
- Fluid transfer and supply
Typical Fluids Handled
- Textured materials
- Adhesives and sealants
- Polyester
- Solvent-borne paints
- Water-borne paints
- Acid catalyzed varnishes, enamels and lacquers
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 10 inches (Hulk) |
| Pressure Ratio | 10:1 |
| Maximum Fluid Working Pressure | 80 bar (1160 PSI) |
| Maximum Air Input Pressure | 8 Bar (116 PSI) |
| Maximum Volume Flow Rate(60 CPM) | 60 lpm (15.8 GPM)( |
| Volume per Cycle | 100 cc ( | Air Inlet Size | 3/4" pt | Fluid Inlet Size | 1" or 3/4" pt |
| Fluid Outlet Size | 3/4 pt |
| Weight | 60 kg |
Manual
TBD
Published in
Pneumatic Piston Pumps
日, 29 5月 2016 04:31
P1302 4" 5:1 Transfer Pumps
Durability and endurance even in the harshest environment. Equipped with 4” ENCO Transfer Pump that generates up to 5:1 output pressure ratio, COSMOSTAR P1302 Transfer Pump is specialized to handle semi-viscous materials with flow-rate up to 8.5 liters/minute. COSMOSTAR P1302 Transfer Pump is the most affordable series of COSMOSTAR Transfer Pump and designed for low cost applications.
jQuery UI Accordion - No auto height
Reliable medium pressure supply
Pressure output capacity of 40 Bar
2-ball provides pump operation for uniform flow
Stainless steel model available to handle various fluids
Features
Application
- Paint circulating
- Ahesive supply
- Fluid transfer and supply
Typical Fluids Handled
- Textured materials
- Adhesives and sealants
- Polyester
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 4.0 inches (Enco) |
| Pressure Ratio | 5:1 |
| Maximum Fluid Working Pressure | 40 bar (580 PSI) |
| Maximum Air Input Pressure | 8 Bar (116 PSI) |
| Maximum Volume Flow Rate(60 CPM) | 8.5 lpm (2.2 GPM)( |
| Volume per Cycle | 141 cc ( | Air Inlet Size | 1/4 pt | Fluid Inlet Size | 1" or 3/4" pt |
| Fluid Outlet Size | 3/4 pt |
| Weight | 15.0 kg |
Manual
TBD
Published in
Pneumatic Piston Pumps
日, 29 5月 2016 04:23
P1312 6" 10:1 Transfer Pumps
Durability and endurance even in the harshest environment. COSMOSTAR P1312 Transfer Pump concentrates on handling high viscous materials. Also equipped with 6” COMPACT Transfer Pump that generates up to 10:1 output pressure ratio, P1312 Transfer Pump guarantees a smooth handling of high viscous materials with adequate flow-rate (up to 11.3 liters/minute).
jQuery UI Accordion - No auto height
Reliable medium pressure supply
Pressure output capacity of 1200 PSI (83 Bar)
2-ball provides pump operation for uniform flow
Stainless steel model available to handle various fluids
Features
Application
- Paint circulating
- Ahesive supply
- Fluid transfer and supply
Typical Fluids Handled
- Textured materials
- Adhesives and sealants
- Polyester
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 6.0 inches (Compact) |
| Pressure Ratio | 10:1 |
| Maximum Fluid Working Pressure | 80 bar (1160 PSI) |
| Maximum Air Input Pressure | 8 Bar (116 PSI) |
| Maximum Volume Flow Rate | 11.6 lpm (3.0 GPM)( | Air Inlet Size | 1/4 pt | Fluid Inlet Size | 1" or 3/4" pt |
| Fluid Outlet Size | 3/4 pt |
| Weight | 20.0 kg |
Manual
TBD
Published in
Pneumatic Piston Pumps
日, 29 5月 2016 04:16
P0182 6" 3:1 Transfer Pumps
Durability and endurance even in the harshest environment. COSMOSTAR P0182 Transfer Pump concentrates on providing a high flow rate in transferring liquids between containers. Equipped with a 6” COMPACT air motor that generates up to 3:1 output pressure ratio, each P0182 Transfer Pump delivers up to 37.8 liters/minute, which makes COMPACT Transfer Pump ideal for jobs that require fast liquid traffic.
jQuery UI Accordion - No auto height
Drum and stubby length models available for mounting and application flexibility
Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
Divorced air motor eliminates fluid and fume contamination, reducing maintenance
Stainless steel or carbon steel models available to handle various fluids
Features
Application
- Paint circulating
- Cleaning and chemical supply
- Fluid transfer and supply
Typical Fluids Handled
- Solvent-borne and waterborne fluid
- Varnishes, enamels and lacquers
- Cleaning fluids
- Adhesives and sealants
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 6.0 inches (Compact) |
| Pressure Ratio | 3:1 |
| Maximum Fluid Working Pressure | 24 bar (348 PSI) |
| Maximum Air Input Pressure | 8 Bar (116 PSI) |
| Maximum Volume Flow Rate | 37.8 lpm (10.0 GPM)( | Air Inlet Size | 1/4 pt | Fluid Inlet Size | 1-1/2 pt |
| Fluid Outlet Size | 3/4 pt |
| Weight | 25.0 kg |
Manual
TBD
Published in
Pneumatic Piston Pumps