SD100 68:1 Flash 10” air motor for spraying PU foam application
The sprayer is designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Flash 10” can always achieve your expectation of fluid atomization.
Mixing Ratio 1:1 Plural-Component Sprayer. The Cosmostar Plural-Component Sprayer provides the high-pressure performance you need to spray high viscosity fluid and high solid coatings. In addition, the unit is designed to gravity feed, which may eliminate the need for feed pumps to your cost.
Features
- Two and three-lower designs achieve a wide variety of mix ratios
- Two-lower design for a consistent 1:1 mix ratio
- Reduces material and solvent waste
- Provides accurately mixed and proportioned material on demand
Application
- Plural component materials
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
| Category | Data |
|---|---|
| Air Motor Diameter | 10 inches (ATLAS) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 68:1 |
| Maximum Fluid Working Pressure | 469 Bar (6800 PSI) |
| Maximum Air Input Pressure | 6.9 Bar (100 PSI) |
| Maximum Volume Flow Rate | 10.2 LPM (2.68 GPM) |
| Volume Per Cycle | 170 cc |
| Air Inlet Size | 3/4 pt(f) |
| Fluid Inlet Size | 3/4 pt(f) |
| Fluid Outlet Size | 1/4 pt(f) |
| Maximum Operating Temperature | 82°C (180°F) |