PF100 50:1 Plural Component Pump

PF100 50:1 Plural Component Pump

 Tough designed sprayer for overall industrial protective coatings PF100 50:1 Atlas 10” Air Motor

For spraying PU foam application, COSMOSTAR PF100 50:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Atlas 10” can always achieve your expectation of fluid atomization.

2404-web_PF100-26.jpg2404-web_PF100-27.jpg2404-web_PF100-28.jpg2404-web_PF100-29.jpg2404-web_PF100-30.jpg

 

Features and Benefits

  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and proportioned material on demand

 Application

  • Plural component materials
  • Off-shore
  • Protective coatings
  • Public works facilities
  • Foam insulation

Typical Fluid Handled

  • Epoxies
  • Polyurethanes
  • High solids polyurethane coatings
Technical Data
CategoryData
Air Motor Diameter 10 Inches (ATLAS)
Mix Ratio 1:1
Pressure Ratio (Fluid to Air) 50:1
Maximum Fluid Working Pressure 5000 PSI (350 Bar)
Maximum Air Input Pressure 100 PSI (7.0 Bar)
Maximum Volume Flow Rate 13.5 LPM (3.5 GPM)
Volume per Cycle 225 cc
Maximum Recommended Pump Speed 60 CPM
Air Inlet Size 3/4 pt(f)
Fluid Inlet Size 3/4 pt(f)
Fluid Outlet Size 1/4 or 3/8 pt(f)
Maximum Operating Temperature 180F (82C)