PF100A 50:1 comes with the perfect set, ready to use for spraying polyurea material.
PF100A plural component sprayer is special equipment developed for polyurea coating. Equipped with Atlas 10” Air Motor 50:1 Pressure Ratio with two cylinders (lowers), mixing ratio 1:1, Tethys 2K gun that provides a stable mix and raw material spraying, and with applying the principle of airflow cleaning will keep the spray gun clear therefore the painting can continue all day long.
Features and Benefits
- The unique characteristic of airflow cleaning completely removes the mixing liquid from the mixing chamber.
- Spraygun could reach 245 BAR
- P0204 transfer pump could ensure the stability of the delivered material to the main pump
Application
- Plural component materials
- Off-shore
- Protective coatings
- Public works facilities
- Foam insulation
Typical Fluid Handled
- Epoxies
- Polyurethanes
- Polyurea
- High solids polyurethane coatings
Technical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 10 Inches (ATLAS) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 50:1 |
| Maximum Fluid Working Pressure | 5000 PSI (350 Bar) |
| Maximum Air Input Pressure | 100 PSI (7.0 Bar) |
| Maximum Volume Flow Rate | 13.5 LPM (3.5 GPM) |
| Volume per Cycle | 225 cc |
| Maximum Recomended Pump Speed | 60 CPM |
| Air Inlet Size | 3/4 pt(f) |
| Fluid Inlet Size | 3/4 pt(f) |
| Fluid Outlet Size | 1/4 or 3/8 pt(f) |
| Maximum Operating Temperature | 180F (82C) |