Suitable for the entry-level system for Polyurea Coating
PF70A Plural component sprayers are designed to spray medium to high solid coatings. PF70A has almost similar flow capability with PF100A, but a smaller 7" air motor. It's ideal for the entry-level system for polyurea coating.
Features and Benefits
- Easy maintenance - Air systems require little maintenance, which leads to less downtime.
- Using less clean-up solvent.
- No Overheating Problem.
- Easy Set Up -> Ready to spray just in minutes.
- Less Air Consumption - 7.5 HP to 10 HPPrecise Mixing & Ratio Assurance.
- Spareparts Guaranteed -> High quality, availability & Quick delivery time.
- Fast Service -> Respond within 24 hours. In order to understand and solve your problem, we provide expert consultation in fluid handling equipment.
PF70A Set complete with
1. Fluid Heater R0350 x 2 Set: Heats material fast for better productivity
2. Transfer Pump P0204 20/200L x 2 Set --> Transfer the material to the equipment
3. 2K Heated Hose with Controller x1 Set: Maintain the material at the desired level of temperature & viscosity.
4. Tethys 2K Gun x1 Set: Superior air purge spray gun for heavy coating
No need to think too much about other problems in spraying plural components anymore.
PF 70A Set got you covered.
| Category | Data |
|---|---|
| Air Motor Diameter | 7" |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 34:1 |
| Maximum Fluid Working Pressure | 4080 PSI (281 Bar) |
| Maximum Air Input Pressure | 120 PSI (8.3 Bar) |
| Maximum Volume Flow Rate | 10.2 LPM (2.68 GPM) |
|
Max Recommended Pump Speed |
170 cc |
| Air Inlet Size | 1/2 pt(f) |
| Fluid Inlet Size | 3/4 pt(f) |
| Fluid Outlet Size | 1/4 pt(f) |
| Maximum Operating Temperature | 180F (82C) |