COSMOSTAR SD100 45:1 for spraying plural component application is designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Atlas 10” motor can always achieve your expectation of fluid atomization.
COSMOSTAR SD100 - 45:1 - Mixing Ratio 2:1 Plural-Component Sprayer. The Cosmostar Plural-Component Sprayer provides the high-pressure performance you need to spray high viscosity fluid and high solid coatings. In addition, the unit is designed to gravity feed, which may eliminate the need for feed pumps to your cost.
Features
- Two and three-lower designs achieve a wide variety of mix ratios
- Two-lower design for a consistent 2:1 mix ratio'
- Three-lower design provides mix ratios above three-lower design provides mix ratios above2:1 for balanced pumping
- Reduces material and solvent waste
- Provides accurately mixed and proportioned material on demand
Application
- Plural component materials
- Foam insulation
- Protective coatings
- Farm and construction equipment
- Truck and bus
- General metal fabrication
- Foam and elastomericTypical Fluids Handled
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
| Category | Data |
|---|---|
| Air Motor Diameter | 10 inches (ATLAS) |
| Mix Ratio | 2:1 |
| Pressure Ratio (Fluid to Air) | 45:1 |
| Maximum Fluid Working Pressure | 310 Bar (4500 PSI) |
| Maximum Air Input Pressure | 6.9 Bar (100 PSI) |
| Maximum Volume Flow Rate | 15.2 LPM (4.0 GPM) |
| Volume Per Cycle | 253 cc |
| Max. Recommended Pump Speed | 60 CPM |
| Air Inlet Size | 3/4 pt(f) |
| Fluid Inlet Size | 3/4 pt(f) |
| Fluid Outlet Size | 1/4 pt(f) |
| Maximum Operating Temperature | 82°C (180°F) |