Plural Component Sprayer 

Plural-component equipment is used to spray very high and 100% solids coatings with pot lives that are very short—from as little as 30 seconds up to a few minutes.

COSMOSTAR Plural Component Sprayer is designed for spraying high viscosity fluid, high solid content material coating. The gravity feed, flush pump and fluid heater can be implemented to face the hardest environment and any coating applications.

Getting the “right and accurate” equipment is the most important consideration in coating PU foam and polyurea, or any 2K material. COSMOSTAR SD/PF series plural component can always be your solution by providing high power output with precision mixing ratio.

Plural Component Sprayer – The Ultimate Solution for Your Coatings Needs

When it comes to coatings application, precision, and efficiency are critical. Our plural component sprayer is designed to meet the demands of high-performance coatings applications, providing a reliable and efficient solution for your projects.

What is a plural component sprayer?

A plural component sprayer is a type of spray equipment that mixes and sprays two or more components simultaneously. These components can include coatings, adhesives, sealants, and other materials. The sprayer ensures accurate and consistent mixing of the components, resulting in a precise and uniform coating.

Why choose our plural component sprayer?

Our plural component sprayer is engineered to deliver exceptional performance, reliability, and efficiency. We offer a range of sprayer models and configurations to meet the needs of various applications, from small to large projects. Our sprayers are also easy to use and maintain, providing a cost-effective solution for your coatings needs.

Advantages of using a plural component sprayer

  • Accurate and consistent mixing of components
  • Precise and uniform coating application
  • High-performance and efficient operation
  • Wide range of applications, including coatings, adhesives, sealants, and more
  • Cost-effective solution for your coatings needs

Our plural component sprayers are widely used in the automotive, construction, aerospace, and marine industries. Their precision and efficiency provide a reliable solution for various coatings applications.

Our plural component sprayer is the ultimate choice if you're looking for a high-performance and efficient solution for your coatings needs. Contact us today to learn more about our sprayers and how they can benefit your projects. Our team of experts is always ready to provide you with the best solutions for your coatings applications.

2k pump

PF100 Plural Component Pump

PF100 Plural Component Pump stars

Tough designed sprayer for overall industrial protective coatings COSMOSTAR PF100 Hulk 10” Air Motor, 50:1 Pressure Ratio with two cylinders (lowers), mixing ratio 1:1 jQuery UI Accordion - No auto height

Features

For spraying PU foam application, COSMOSTAR PF100 50:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Hulk 10” can always achieve your expectation of fluid atomization.

Features and Benefits
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand

    • Application

    • Plural component materials
    • Off-shore
    • Protective coatings
    • Public works facilities
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter10 inches (Flash)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)50:1
    Maximum Fluid Working Pressure 5000 PSI (350 Bar)
    Maximum Air Input Pressure 100 PSI (6.9 Bar)
    Maximum Volume Flow Rate 13.5 LPM (3.5 GPM)
    Air Inlet Size 3/4 pt
    Fluid Inlet Size 3/4 pt
    Fluid Outlet Size 1/4 pt or 3/8 pt
    Maximum Operating Temperature 180F (82C)

    Manual

    TBD

    access_time
    PF70 Plural Component Pump

    PF70 Plural Component Pump

    Tough designed sprayer for overall industrial protective coatings COSMOSTAR PF70 flash 7” Air Motor, 34:1 Pressure Ratio with two cylinders (lowers), mixing ratio 1:1. jQuery UI Accordion - No auto height

    Features

    For spraying PU foam application, COSMOSTAR PF70 34:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Flash 7” can always achieve your expectation of fluid atomization.

    Features and Benefits
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand

    • Application

    • Plural component materials
    • Off-shore
    • Protective coatings
    • Public works facilities
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter7 inches (Flash)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)34:1
    Maximum Fluid Working Pressure 4080 PSI (281 Bar)
    Maximum Air Input Pressure 120 PSI (8.3 Bar)
    Maximum Volume Flow Rate 10.2 LPM (2.68 GPM)
    Air Inlet Size 3/4 npt(f)
    Fluid Inlet Size 3/4 npt(f)
    Fluid Outlet Size 3/8 npt(f)
    Maximum Operating Temperature 180F (82C)

    Manual

    TBD

    access_time
    PF60 Plural Component Sprayer

    PF60 Plural Component Sprayer

    For spraying PU foam application, COSMOSTAR PF60 24:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. jQuery UI Accordion - No auto height

    Features

    Equipped with two positive displacements can provide the most reliable mixing ratio and Compact 6" can always achieve your expectation about fluid atomization.
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand

    • Application

    • Plural component materials
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter6 inches (COMPACT)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)24:1
    Maximum Fluid Working Pressure 2880 PSI (200 Bar)
    Maximum Air Input Pressure 120 PSI (8.3 Bar)
    Maximum Volume Flow Rate 3.8 LPM (1.0 GPM)
    Air Inlet Size 3/4 npt(f)
    Fluid Inlet Size 3/4 npt(f)
    Fluid Outlet Size 3/8 npt(f)
    Maximum Operating Temperature 180F (82C)

    Manual

    TBD

    access_time
    Cosmostar SD100 Plural Component Sprayer

    SD100 Plural Component Pump stars

    COSMOSTAR SD100 - 68:1 - Mixing Ratio 1:1 Plural Component Sprayer. jQuery UI Accordion - No auto height

    Features

    The Cosmostar Plural-Component Sprayer provides the high pressure performance you need to spray high viscosity fluid and high solid coatings. In addition, the unit is designed to gravity feed, which may eliminate the need for feed pumps to your cost.
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand

    • Application

    • Plural component materials
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter10 inches (HULK)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)68:1
    Maximum Fluid Working Pressure 7250 PSI (500 Bar)
    Maximum Air Input Pressure 106 PSI (7.5 Bar)
    Maximum Volume Flow Rate 8.4 LPM (2.2 GPM)
    Air Inlet Size 3/4 npt(f)
    Fluid Inlet Size 3/4 npt(f)
    Fluid Outlet Size 3/8 npt(f)
    Maximum Operating Temperature 180F (82C)

    Manual

    access_time
    SD60 Plural Component Sprayer

    SD60 Plural Component Sprayer

    For spraying PU foam application, COSMOSTAR SD60 24:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. jQuery UI Accordion - No auto height

    Features

    Equipped with two positive displacements can provide the most reliable mixing ratio and Compact 6" can always achieve your expectation about fluid atomization.
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand

    • Application

    • Plural component materials
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter6 inches (COMPACT)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)24:1
    Maximum Fluid Working Pressure 2880 PSI (200 Bar)
    Maximum Air Input Pressure 120 PSI (8.3 Bar)
    Maximum Volume Flow Rate 3.8 LPM (1.0 GPM)
    Air Inlet Size 3/4 npt(f)
    Fluid Inlet Size 3/4 npt(f)
    Fluid Outlet Size 3/8 npt(f)
    Maximum Operating Temperature 180F (82C)

    Manual

    TBD

    access_time
    Subscribe to this RSS feed

    This module uses: "overlay overlay-dark-color" suffixes

    access_time 10th September 2015 Get started

     

    COSMOSTAR | GRACO PLURAL COMPONENT SPRAYER

    Plural-component equipment is used to spray very high and 100% solids coatings with pot lives that are very short—from as little as 30 seconds up to a few minutes. COSMOSTAR Plural Component Sprayer is designed for spraying high viscosity fluid, high solid content material coating. The gravity feed, flush pump and fluid heater can be implemented to face the hardest environment and any coating applications. Getting the “right and accurate” equipment is the most important consideration in coating PU foam and polyurea, or any 2K material. COSMOSTAR PF series plural component can always be your solution by providing high power output with precision mixing ratio. Few advantages of plural component sprayer are a) cost savings, Plural component equipment mixes your application elements in real-time as you’re applying them, which means you’re only mixing what you need for the job; b) time savings, cleaning that hot pot takes some time and effort, where the Graco plural component sprayer just needs to be flushed out and shut down; c) Environmental friendliness, plural component proportioners use very little solvents, and in the case of 100% solids, there’s none at all (except for flushing). This means that emissions are reduced significantly when you use plural component equipment.