chartek 7

宇星V0118 10英吋 80:1高黏度擠壓泵浦 stars

抽取高黏度流體宇星V0118配備宇星10英吋馬達頭80:1 高壓擠壓泵浦,是您輸送抽取高黏度流量的理想選擇,即使在最惡劣的環境下,它也能提供高度可靠的性能,高流量和堅強的設計使得V0118擁有80:1極高的壓力比,專門處理極高黏度的流體。 jQuery UI Accordion - No auto height

特點與優勢

宇星V0118高壓擠壓泵浦,最大壓力達510bar,流量可達8.7公升/分鐘
  • 極高的壓力比,流量大
  • 機動性高,並可輸送抽取高黏度流體
  • 主要應用

    • 輸送高黏度流體,不需外加溶劑稀釋
    • 抽取如乳膠、密封劑等高黏度流體
    適用材料
    • 密封劑
    • 潤滑油
    • 黏著劑

    技術規範

    CategoryData
    氣動馬達直徑 10英吋
    壓力比 80:1
    最大流體工作壓力 510 Bar(7400 PSI)
    最大空氣入口壓力 6.3 Bar (92.5PSI)
    最大流量(60次/每分鐘) 2.3公升/每分鐘
    空氣入口大小 3/4” pt
    流體入口大小 3/4”
    流體出口大小3/8”或1/2”pt
    重量 105.5kg

    Manual

    TBD

    V0118 10" 80:1 Chartek Ram-Mounted Pumps stars

    Easy handling extremely viscous fluids COSMOSTAR V0118 80:1 High Viscous Fluid Transfer Pump is the answer for your high viscosity flow rate applications.It offers highly reliable performance even in the harshest environment. Combination of extreme pressure ratio, high flow rate and rugged design make V0118 80:1 ideal for handling extremely viscous fluids. jQuery UI Accordion - No auto height

    Features

  • Higher pressure ratio and high flow rate
  • Maintain balance over a wide viscosity range
  • Application

    • Handling heavy-to-inflowing fluids
    • without having to inject additional viscosity reducer fluids.
    • Dispensing silicone, latex or acrylic sealants
    • Dispensing greases and other lubricants
    Typical Fluids Handled
    • Chartek 7
    • Sealants
    • Adhesives
    • Lubricants

    Techanical Data

    CategoryData
    Air Motor Diameter 10 inches (Compact)
    Pressure Ratio 80:1
    Maximum Fluid Working Pressure 7400 PSI (510 Bar)
    Maximum Air Input Pressure 92.5 PSI (6.3 Bar)
    Maximum Volume Flow Rate 8.7 GPM(2.3 lpm)
    Air Inlet Size 3/4 pt
    Fluid Inlet Size 3/4 pt
    Fluid Outlet Size 3/8" pt or 1/2" pt
    Weight 105 kg

    Video

    Subscribe to this RSS feed