pneumatic piston pump

宇星P0169 10英吋 10:1 氣動輸送泵浦

宇星P0169 10英吋 10:1 氣動輸送泵浦 stars

宇星P0169 3:1 是輸送高黏度液態原料的最佳選擇，擁有高壓力比與高流量，可以輕而易舉處理各種大範圍流體，包含低、中、高黏度流體的輸送。搭配高耐用及高效能10英吋空氣馬達頭，使泵浦可以無疑問運用在任何艱難的環境下，並且全天候的運作。 jQuery UI Accordion - No auto height

特點與優勢

  • 輸送高黏度原料的最佳選擇
  • 獨特的活塞行程設計提供大輸送量且減少磨耗與維修成本
  • 獨特的軸桿設計帶來絕佳的密封效果，增加輸送效率，並提昇泵浦壽命

    • 主要應用

    • 塗裝原料循環
    • 輸送流體原料
    • 高黏度流體輸送
    適用材料
    • 溶劑原料
    • 各種亮光漆原料
    • 水溶性原料
    • 樹脂、白膠

    技術規範

    CategoryData
    氣動馬達直徑 10 英吋 (Compact)
    壓力比 10:1
    最大流體工作壓力80bar (1160 PSI)
    最大空氣入口壓力8 Bar (116 PSI)
    最大流量 60 lpm (15.8 GPM)(
    單次平均流量 100cc
    空氣入口大小 3/4” pt
    流體入口大小 1" or 3/4" pt
    流體出口大小 3/4 pt
    重量/機台尺寸 60.0 kg/1.17公尺(長)

    Manual

    TBD

    access_time
    宇星P0201 2英吋 1:1 氣動輸送泵浦

    宇星P0201 2英吋 1:1 氣動輸送泵浦 stars

    宇星 P0201 1:1 提供高效的流量輸出，可輸送10000 CPS下低黏度液態原料。藉由泵浦本身有高效能與高可靠度的設計下，使其在低壓下運作下，就可使大量的流體運輸至所需之地點。 jQuery UI Accordion - No auto height

    特點與優勢

  • 流量可達每分鐘15公升
  • 將長桶邊進料口浸入原料中便可加快抽取黏度較高的流體原料
  • 可浸入之進料口優於不可侵入之進料口
  • 高可靠度、低設備成本

    • 主要應用

    • 連續性的原料輸送
    • 低黏度噴漆黏著劑
    • 噴漆機之輸送端
    適用材料
    • 墊片溶劑
    • 非凝固性原料
    • 低黏度塗裝原料
    • 馬達油或油壓缸油
    • 化學稀釋劑或溶劑
    • 一般化學液態材料

    技術規範

    CategoryData
    氣動馬達直徑 2.0英吋(Hi-Flux)
    壓力比 1:1
    最大流體工作壓力 180 PSI (12.4 Bar)
    最大空氣入口壓力180 PSI (1.42 Bar)
    最大流量4.0 GPM(15 lpm)
    空氣入口大小 1/4 pt
    流體入口大小 1-1/2 pt
    流體出口大小 3/4 pt
    重量/機台尺寸 10.0 kg/1.35公尺(長)

    Manual

    TBD

    access_time
    宇星P0204 2.5英吋 2:1 氣動輸送泵浦

    宇星P0204 2.5英吋 2:1 氣動輸送泵浦 stars

    宇星 P0204 2:1 提供高效的流量輸出，可輸送10000 CPS下低黏度液態原料。藉由泵浦本身有高效能與高可靠度的設計下，使其在低壓下運作下，就可使大量的流體運輸至所需之地點。 jQuery UI Accordion - No auto height

    特點與優勢

  • 流量可達每分鐘15公升
  • 將長桶邊進料口浸入原料中便可加快抽取黏度較高的流體原料
  • 可浸入之進料口優於不可侵入之進料口
  • 高可靠度、低設備成本

    • 主要應用

    • 連續性的原料輸送
    • 低黏度噴漆黏著劑
    • 噴漆機之輸送端
    適用材料
    • 墊片溶劑
    • 非凝固性原料
    • 低黏度塗裝原料
    • 馬達油或油壓缸油
    • 化學稀釋劑或溶劑
    • 一般化學液態材料

    技術規範

    CategoryData
    氣動馬達直徑 2.5英吋 (Hi-Flux)
    壓力比 2:1
    最大流體工作壓力 240 PSI (16.6 Bar)
    最大空氣入口壓力 120 PSI (8.3 Bar)
    最大流量 3.95 GPM(15 lpm)
    空氣入口大小 1/4 pt
    流體入口大小 1-1/2 pt
    流體出口大小 3/4 pt
    重量/機台尺寸 12.0 kg/1.35公尺(長)

    Manual

    TBD

    access_time
    D0906 1" Double Diaphragm Pumps

    D0906 1" Double Diaphragm Pumps

    <!description> Designed for high output volume per cycle, high power and performance Ideal for transferring a wide variety of fluid, D0906 offers high pumping capacity in a small package. D0906 pump guarantees high endurance and durability. <!doctype html> jQuery UI Accordion - No auto height

    Features

    • High Flow rate, deliver up to 175 liters per minute, in a small portable package
    • Clean, hands-off fluid handling
    • High performance with high mobility

    Application

    Typical Application
    • Drum transfer for fluids up 5000 cps
    • Unloading fluid
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    Fluid Outlet Size1 ptFluid Inlet Size1 pt
    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 175 LPM
    Maximum pumpable fluid viscosity 5000 CPS
    Maximum Air Consumption 1600 LPM
    Maximum Suction Lift 8.3m
    Maximum size pumpable solids 3 mm
    Air pressure operating range 2.0 - 8.0 bar
    Air Inlet Size 1/2 pt

    Manual

    TBD

    access_time
    D0908 2&quot; Double Diaphragm Pumps

    D0908 2" Double Diaphragm Pumps

    D0908 is designed to handle high viscous fluid and to deliver high flow rate. Large sized, solid, chemically-inert Teflon plates in both compartments make D0908 suitable to pump wide variety of liquid, even the most aggressive ones. jQuery UI Accordion - No auto height

    Features

  • Bigger ports for higher flow rates, up to 620 liters per minute
  • Lubrication-less operation
  • Designed for tough environments

    • Application

      Typical Application
    • Drum transfer for fluids up 10000 cps
    • Unloading fluid
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 620 LPM
    Maximum pumpable fluid viscosity 10000 CPS
    Maximum Air Consumption 5500 LPM
    Maximum Suction Lift 8.1m
    Maximum size pumpable solids 7 mm
    Air pressure operating range 2.0 - 8.0 bar
    Air Inlet Size 3/4 pt
    Fluid Outlet Size 2 pt
    Fluid Inlet Size 2 pt

    Manual

    TBD

    access_time
    D0307 1 1/2&quot; Double Diaphragm Pumps

    D0307 1 1/2" Double Diaphragm Pumps

    D0307 is designed for handling heavier, higher viscosity fluid and pumping large size solids faster. Chemically-inert Teflon plates in both compartments make D0307 suitable to pump wide variety of liquid, even the most aggressive ones. jQuery UI Accordion - No auto height

    Features

  • Larger ports for larger flow rates, up to 340 liters per minute
  • Freely lubricate operation
  • Used in various tough environment and condition

    • Application

      Typical Application
    • Drum transfer for fluids up 10000 cps
    • Unloading fluid
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 340 LPM
    Maximum pumpable fluid viscosity 10000 CPS
    Maximum Air Consumption 5500 LPM
    Maximum Suction Lift 6.1m
    Maximum size pumpable solids 7 mm
    Air pressure operating range 2.0 - 8.0 bar
    Air Inlet Size 3/4 pt
    Fluid Outlet Size 1 1/2 pt
    Fluid Inlet Size 1 1/2 pt

    Manual

    TBD

    access_time
    D0903 3/4&quot; Double Diaphragm Pumps

    D0903 3/4" Double Diaphragm Pumps

    The D0903 is designed for handling light to medium viscosity fluid with high flow rates up to 120 liters per minutes. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 120 liters per minute, in a small portable package
  • Clean, hands-off fluid handling
  • Quiet running, up to 85dB with easy to use remote muffler capability for even lower noise levels

    • Application

      Typical Application
    • Drum transfer for fluids up 5000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    • Cleaning fluids and detergents
    • Plating and dip tanks
    • Water treatment
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.3 bar
    Maximum Flow Delivery 120 LPM
    Maximum pumpable fluid viscosity 5000 CPS
    Maximum Air Consumption 1200 LPM
    Maximum Suction Lift 8.3m
    Maximum size pumpable solids 2 mm
    Air pressure operating range 1.5 - 8.3 bar
    Air Inlet Size 1/2 pt
    Fluid Outlet Size 3/4 pt
    Fluid Inlet Size 3/4 pt

    Manual

    TBD

    access_time
    D0302 3/8&quot; Double Diaphragm Pumps

    D0302 3/8" Double Diaphragm Pumps

    D0302 3/8" pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluids. Installed with Teflon plate at each of the diaphragm compartments, D0302 Pumps guarantee high endurance and durability. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 23 liters per minute, in a small portable package
  • Easy maintenance air valves and ball checks
  • Operate on as little as 20 psi (1.4bar) air pressure
  • Low noise

    • Application

      Typical Application
    • Drum transfer for fluids up 3000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 23 LPM
    Maximum pumpable fluid viscosity 3000 CPS
    Maximum Air Consumption 300 LPM
    Maximum Suction Lift 0.9 m dry, 6.3m wet
    Maximum size pumpable solids 1 mm
    Air pressure operating range 1.4 - 8.0 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 3/8 pt
    Fluid Inlet Size 3/8 pt

    Manual

    TBD

    access_time
    D0902 3/8&quot; Double Diaphragm Pumps

    D0902 3/8" Double Diaphragm Pumps stars

    D0902 3/8" pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluids. Installed with Teflon plate at each of the diaphragm compartments, D0902 Pumps guarantee high endurance and durability. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 23 liters per minute, in a small portable package
  • Easy maintenance air valves and ball checks
  • Operate on as little as 20 psi (1.4bar) air pressure
  • Low noise

    • Application

      Typical Application
    • Drum transfer for fluids up 3000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 23 LPM
    Maximum pumpable fluid viscosity 3000 CPS
    Maximum Air Consumption 300 LPM
    Maximum Suction Lift 0.9 m dry, 6.3m wet
    Maximum size pumpable solids 1 mm
    Air pressure operating range 1.4 - 8.0 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 3/8 pt
    Fluid Inlet Size 3/8 pt

    Manual

    TBD

    access_time
    D0306 1&quot; Double Diaphragm Pumps

    D0306 1" Double Diaphragm Pumps

    Designed for high output per cycle, high power and performance.Ideal for transferring a wide variety of fluids. D0306 offers high pumping capacity in a small package. D0306 pumps are also available with a stainless steel body, which makes them ideal to operate in highly hygienic environment. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, up to 133 liters per minute, in a small portable package
  • Clean, hands-off fluid handling
  • High performance with high mobility

    • Application

      Typical Application
    • Drum fluid transfer
    • Unloading fluids
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.3 bar
    Maximum Flow Delivery 113 LPM
    Maximum pumpable fluid viscosity 5,000 CPS
    Maximum size pumpable solids 3.2 mm(116 PSI)
    Air pressure operating range 1-8 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 1 pt
    Fluid Inlet Size 1 pt

    Manual

    TBD

    access_time
    Subscribe to this RSS feed

    This module uses: "overlay overlay-dark-color" suffixes

    access_time 10th September 2015 Get started