SD60 Plural Component Sprayer
For spraying PU foam application, COSMOSTAR SD60 24:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment.
jQuery UI Accordion - No auto height
Two and three-lower designs achieve a wide variety of mix ratios
Two-lower design for a consistent 1:1 mix ratio
Reduces material and solvent waste
Provides accurately mixed and propotioned material on demand
Features
Equipped with two positive displacements can provide the most reliable mixing ratio and Compact 6" can always achieve your expectation about fluid atomization.
Application
- Plural component materials
- Foam insulation
Typical Fluids Handled
- Epoxies
- Polyurethanes
- High solids polyurethane coatings
Techanical Data
| Category | Data |
|---|---|
| Air Motor Diameter | 6 inches (COMPACT) |
| Mix Ratio | 1:1 |
| Pressure Ratio (Fluid to Air) | 24:1 |
| Maximum Fluid Working Pressure | 2880 PSI (200 Bar) |
| Maximum Air Input Pressure | 120 PSI (8.3 Bar) |
| Maximum Volume Flow Rate | 3.8 LPM (1.0 GPM) | Air Inlet Size | 3/4 npt(f) | Fluid Inlet Size | 3/4 npt(f) |
| Fluid Outlet Size | 3/8 npt(f) |
| Maximum Operating Temperature | 180F (82C) |
Manual
TBD
- 2k pump
- cosmostar
- Cosmostar sprayer
- plural component sprayer
- High viscosity fluid sprayer
- High solid coatings sprayer
- High resistance sprayer
- Durable sprayer
- Mix ratio
- Mix ratio airless sprayer
- Mix ratio sprayer
- Protective coatings sprayer
- Farm and construction equipment sprayer
- Truck paint sprayer
- Bus paint sprayer
- General metal fabrication sprayer
- Foam and elastomeric sprayer
- Epoxies sprayer
- Polyurethanes sprayer
- Waterborne sprayer
- Acidcatalyzed wood finishing materials sprayer
- Stains sprayer
- Lacquers sprayer
- Varnishes sprayer
