2k pump

宇星SD60 兩液高壓輸送泵浦

強大與整合的設備克服艱難的事物, 敬億宇星 SD60 6英吋氣動馬達頭 24:1 兩液高壓輸送泵浦,混合比例:1:1 jQuery UI Accordion - No auto height

特點與優勢

敬億宇星SD60兩夜高壓輸送泵浦系統,可符合需同時輸送兩種液體混和的要求,配備敬億6英吋氣動馬達頭24:1兩液高壓輸送泵浦,可在高壓力輸送兩種平均流體。隨後的P1302 4英吋馬達頭5:1輸送泵浦,即扮演清洗泵浦之功能,以維持混合器之功能與壽命。 敬億宇星SD60將是兩液輸送最優質的選擇.
  • 獨特的雙活塞桿設計,維持提供1:1的混合比例
  • 搭配清洗泵浦之功能,增加混合效與產品壽命
  • 減少材料和溶劑的消耗
  • 主要應用

    • 建築事業
    • 交通事業
    • 金屬事業
    • 橡膠事業
    • 密封或膠黏事業
    適用材料
    • 環氧化物
    • 聚胺甲酸酯
    • 凡林水

    技術資料

    CategoryData
    氣動馬達直徑6 英吋 (COMPACT)
    流體混合比1:1
    壓力比(流體對空氣)24:1
    最大流體工作壓力2880 PSI (200 Bar)
    最大空氣入口壓力120 PSI (8.3 Bar)
    最大流量 3.8 LPM (1.0 GPM)
    空氣入口大小 3/4 npt(f)
    流體入口大小 3/4 npt(f)
    流體出口大小 3/8 npt(f)
    最高工作溫度 180F (82C)

    Manual

    TBD

    宇星PF60 兩液高壓輸送泵浦

    強大與整合的設備克服艱難的事物 敬億宇星PF60 六英吋氣動馬達頭, 24:1 兩液高壓輸送泵浦,混合比例: 1:1. jQuery UI Accordion - No auto height

    特點與優勢

    Equipped with two positive displacements can provide the most reliable mixing ratio and Compact 6" can always achieve your expectation about fluid atomization.
    敬億宇星PF60兩夜高壓輸送泵浦系統,可符合需同時輸送兩種液體混和的要求,配備敬億六英吋氣動馬達頭24:1兩液高壓輸送泵浦,可在高壓力輸送兩種平均流體。敬億宇星PF60將是兩液輸送最優質的選擇
  • 獨特的雙活塞桿設計,維持提供1:1的混合比例
  • 減少材料和溶劑的消耗
  • 主要應用

    • 建築事業
    • 交通事業
    • 金屬事業
    • 橡膠事業
    • 密封或膠黏事業
    適用材料
    • 環氧化物
    • 聚胺甲酸酯
    • 凡林水

    技術資料

    CategoryData
    氣動馬達直徑6 英吋 (COMPACT)
    流體混合比1:1
    壓力比(流體對空氣)24:1
    最大流體工作壓力 2880 PSI (200 Bar)
    最大空氣入口壓力 120 PSI (8.3 Bar)
    最大流量 3.8 LPM (1.0 GPM)
    空氣入口大小3/4 npt(f)
    流體入口大小3/4 npt(f)
    流體出口大小 3/8 npt(f)
    最高工作溫度 180F (82C)

    Manual

    TBD

    PF100 Plural Component Pump stars

    Tough designed sprayer for overall industrial protective coatings COSMOSTAR PF100 Hulk 10” Air Motor, 50:1 Pressure Ratio with two cylinders (lowers), mixing ratio 1:1 jQuery UI Accordion - No auto height

    Features

    For spraying PU foam application, COSMOSTAR PF100 50:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Hulk 10” can always achieve your expectation of fluid atomization.

    Features and Benefits
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand
  • Application

    • Plural component materials
    • Off-shore
    • Protective coatings
    • Public works facilities
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter10 inches (Flash)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)50:1
    Maximum Fluid Working Pressure 5000 PSI (350 Bar)
    Maximum Air Input Pressure 100 PSI (6.9 Bar)
    Maximum Volume Flow Rate 13.5 LPM (3.5 GPM)
    Air Inlet Size 3/4 pt
    Fluid Inlet Size 3/4 pt
    Fluid Outlet Size 1/4 pt or 3/8 pt
    Maximum Operating Temperature 180F (82C)

    Manual

    TBD

    PF70 Plural Component Pump

    Tough designed sprayer for overall industrial protective coatings COSMOSTAR PF70 flash 7” Air Motor, 34:1 Pressure Ratio with two cylinders (lowers), mixing ratio 1:1. jQuery UI Accordion - No auto height

    Features

    For spraying PU foam application, COSMOSTAR PF70 34:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. Equipped with two positive displacements to provide the most reliable mixing ratio, Flash 7” can always achieve your expectation of fluid atomization.

    Features and Benefits
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand
  • Application

    • Plural component materials
    • Off-shore
    • Protective coatings
    • Public works facilities
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter7 inches (Flash)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)34:1
    Maximum Fluid Working Pressure 4080 PSI (281 Bar)
    Maximum Air Input Pressure 120 PSI (8.3 Bar)
    Maximum Volume Flow Rate 10.2 LPM (2.68 GPM)
    Air Inlet Size 3/4 npt(f)
    Fluid Inlet Size 3/4 npt(f)
    Fluid Outlet Size 3/8 npt(f)
    Maximum Operating Temperature 180F (82C)

    Manual

    TBD

    PF60 Plural Component Sprayer

    For spraying PU foam application, COSMOSTAR PF60 24:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. jQuery UI Accordion - No auto height

    Features

    Equipped with two positive displacements can provide the most reliable mixing ratio and Compact 6" can always achieve your expectation about fluid atomization.
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand
  • Application

    • Plural component materials
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter6 inches (COMPACT)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)24:1
    Maximum Fluid Working Pressure 2880 PSI (200 Bar)
    Maximum Air Input Pressure 120 PSI (8.3 Bar)
    Maximum Volume Flow Rate 3.8 LPM (1.0 GPM)
    Air Inlet Size 3/4 npt(f)
    Fluid Inlet Size 3/4 npt(f)
    Fluid Outlet Size 3/8 npt(f)
    Maximum Operating Temperature 180F (82C)

    Manual

    TBD

    SD100 Plural Component Pump stars

    COSMOSTAR SD100 - 68:1 - Mixing Ratio 1:1 Plural Component Sprayer. jQuery UI Accordion - No auto height

    Features

    The Cosmostar Plural-Component Sprayer provides the high pressure performance you need to spray high viscosity fluid and high solid coatings. In addition, the unit is designed to gravity feed, which may eliminate the need for feed pumps to your cost.
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand
  • Application

    • Plural component materials
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter10 inches (HULK)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)68:1
    Maximum Fluid Working Pressure 7250 PSI (500 Bar)
    Maximum Air Input Pressure 106 PSI (7.5 Bar)
    Maximum Volume Flow Rate 8.4 LPM (2.2 GPM)
    Air Inlet Size 3/4 npt(f)
    Fluid Inlet Size 3/4 npt(f)
    Fluid Outlet Size 3/8 npt(f)
    Maximum Operating Temperature 180F (82C)

    Manual

    SD60 Plural Component Sprayer

    For spraying PU foam application, COSMOSTAR SD60 24:1 with mixing ratio 1:1 are designed to overcome the toughest job site environment. jQuery UI Accordion - No auto height

    Features

    Equipped with two positive displacements can provide the most reliable mixing ratio and Compact 6" can always achieve your expectation about fluid atomization.
  • Two and three-lower designs achieve a wide variety of mix ratios
  • Two-lower design for a consistent 1:1 mix ratio
  • Reduces material and solvent waste
  • Provides accurately mixed and propotioned material on demand
  • Application

    • Plural component materials
    • Foam insulation
    Typical Fluids Handled
    • Epoxies
    • Polyurethanes
    • High solids polyurethane coatings

    Techanical Data

    CategoryData
    Air Motor Diameter6 inches (COMPACT)
    Mix Ratio1:1
    Pressure Ratio (Fluid to Air)24:1
    Maximum Fluid Working Pressure 2880 PSI (200 Bar)
    Maximum Air Input Pressure 120 PSI (8.3 Bar)
    Maximum Volume Flow Rate 3.8 LPM (1.0 GPM)
    Air Inlet Size 3/4 npt(f)
    Fluid Inlet Size 3/4 npt(f)
    Fluid Outlet Size 3/8 npt(f)
    Maximum Operating Temperature 180F (82C)

    Manual

    TBD

    Subscribe to this RSS feed
    COSMOSTAR TECH. LTD. Email: sales@cosmostar.net Tel:+886-2-26687799 Fax:+886-2-26688991
    Use of this site constitutes acceptance of our user agreement and privacy policy.
    The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of COSMOSTAR Tech.