rammounted pumps

V0810 6" 20:1 High Viscous Fluid Transfer Pump

V0810 6" 20:1 High Viscous Fluid Transfer Pump

Cosmostar V0810 provide flow rate up to 4.5 liter per minute (1.2 gpm) and operating pressures up to 248 bars.

  • High output per cycle; reduced wearing for longer life and lower repair costs
  • Large internal porting for maximum flow
  • Additional Air-Powered Ram is available for improving performance

Application

  • Handling heavy-to-inflowing fluids
  • No additional viscosity reducer fluid needed when handling heavy-to-flow fluids
  • Dispensing silicone, latex or acrylic sealants
  • Dispensing greases and other lubricants
Typical Fluids Handled
  • Sealants
  • Adhesives
  • Lubricants
  • Inks
  • Mastics

Techanical Data

Air Inlet Size1/4 pt
CategoryData
Air Motor Diameter 6 inches (Compact)
Pressure Ratio 20:1
Maximum Fluid Working Pressure 3600 PSI (248 Bar)
Maximum Air Input Pressure 120 PSI (8.3 Bar)
Maximum Volume Flow Rate 1.2 GPM(4.5 lpm)
Fluid Outlet Size 3/4 pt
Weight 30 kg (Bare Pump)

Manual

TBD

access_time
宇星V0802 6英吋 24:1高黏度擠壓泵浦

宇星V0802 6英吋 24:1高黏度擠壓泵浦

抽取高黏度流體宇星V0802提供高機動性並可抽取高黏度流體的高性能，配備宇星6英吋馬達頭24:1 高壓擠壓泵浦，最大壓力達200bar，流量可達2公升/分鐘，是您對於輸送高黏度流體所需的設備之最佳選擇。 jQuery UI Accordion - No auto height

特點與優勢

宇星V0802高壓擠壓泵浦，最大壓力達200bar，流量可達2公升/分鐘
  • 高效能輸出、低磨耗，增加使用壽命及降低維修成本
  • 機動性高，並可輸送抽取高黏度流體

    • 主要應用

    • 輸送高黏度流體，不需外加溶劑稀釋
    • 抽取如密封劑、黏膠劑等高黏度流體
    適用材料
    • 密封劑
    • 潤滑油
    • 黏著劑
    • 高黏度墨水

    技術規範

    CategoryData
    氣動馬達直徑 6英吋
    壓力比 24:1
    最大流體工作壓力 200 Bar(2400 PSI)
    最大空氣入口壓力 8.3 Bar (120 PSI)
    最大流量(60次/每分鐘) 2.0公升/每分鐘 (0.53 gpm)
    空氣入口大小 1/2” pt
    流體入口大小 1”pt
    流體出口大小1”pt
    重量 94.5kg (5G)

    Manual

    TBD

    access_time
    宇星V0118 10英吋 80:1高黏度擠壓泵浦

    宇星V0118 10英吋 80:1高黏度擠壓泵浦 stars

    抽取高黏度流體宇星V0118配備宇星10英吋馬達頭80:1 高壓擠壓泵浦，是您輸送抽取高黏度流量的理想選擇，即使在最惡劣的環境下，它也能提供高度可靠的性能，高流量和堅強的設計使得V0118擁有80:1極高的壓力比，專門處理極高黏度的流體。 jQuery UI Accordion - No auto height

    特點與優勢

    宇星V0118高壓擠壓泵浦，最大壓力達510bar，流量可達8.7公升/分鐘
  • 極高的壓力比，流量大
  • 機動性高，並可輸送抽取高黏度流體

    • 主要應用

    • 輸送高黏度流體，不需外加溶劑稀釋
    • 抽取如乳膠、密封劑等高黏度流體
    適用材料
    • 密封劑
    • 潤滑油
    • 黏著劑

    技術規範

    CategoryData
    氣動馬達直徑 10英吋
    壓力比 80:1
    最大流體工作壓力 510 Bar(7400 PSI)
    最大空氣入口壓力 6.3 Bar (92.5PSI)
    最大流量(60次/每分鐘) 2.3公升/每分鐘
    空氣入口大小 3/4” pt
    流體入口大小 3/4”
    流體出口大小3/8”或1/2”pt
    重量 105.5kg

    Manual

    TBD

    access_time
    V0118 10" 80:1 Chartek Ram-Mounted Pumps

    V0118 10" 80:1 Chartek Ram-Mounted Pumps stars

    Easy handling extremely viscous fluids COSMOSTAR V0118 80:1 High Viscous Fluid Transfer Pump is the answer for your high viscosity flow rate applications.It offers highly reliable performance even in the harshest environment. Combination of extreme pressure ratio, high flow rate and rugged design make V0118 80:1 ideal for handling extremely viscous fluids. jQuery UI Accordion - No auto height

    Features

  • Higher pressure ratio and high flow rate
  • Maintain balance over a wide viscosity range

    • Application

    • Handling heavy-to-inflowing fluids
    • without having to inject additional viscosity reducer fluids.
    • Dispensing silicone, latex or acrylic sealants
    • Dispensing greases and other lubricants
    Typical Fluids Handled
    • Chartek 7
    • Sealants
    • Adhesives
    • Lubricants

    Techanical Data

    CategoryData
    Air Motor Diameter 10 inches (Compact)
    Pressure Ratio 80:1
    Maximum Fluid Working Pressure 7400 PSI (510 Bar)
    Maximum Air Input Pressure 92.5 PSI (6.3 Bar)
    Maximum Volume Flow Rate 8.7 GPM(2.3 lpm)
    Air Inlet Size 3/4 pt
    Fluid Inlet Size 3/4 pt
    Fluid Outlet Size 3/8" pt or 1/2" pt
    Weight 105 kg

    Video

    access_time
    V0802 6" 24:1 Ram-mounted Pumps

    V0802 6" 24:1 Ram-mounted Pumps

    V0802-5G Compact 6" 24:1 Air-operated pump for high viscosity fluid jQuery UI Accordion - No auto height

    Features

    Cosmostar V0802 provide flow rate up to 2 liter per minute (0.53 gpm) and operating pressures up to 200 bars.
  • High output per cycle; reduced wearing for longer life and lower repair costs
  • Large internal porting for maximum flow
  • Additional Air-Powered Ram is available for improving performance

    • Application

    • Handling heavy-to-inflowing fluids
    • without having to inject additional viscosity reducer fluids.
    • Dispensing silicone, latex or acrylic sealants
    • Dispensing greases and other lubricants
    Typical Fluids Handled
    • Sealants
    • Adhesives
    • Lubricants

    Techanical Data

    CategoryData
    Air Motor Diameter 6 inches (Compact)
    Pressure Ratio 24:1
    Maximum Fluid Working Pressure 2400 PSI (200 Bar)
    Maximum Air Input Pressure 120 PSI (8.3 Bar)
    Maximum Volume Flow Rate 0.53 GPM(2.0 lpm)
    Air Inlet Size 1/2 npt(f)
    Fluid Inlet Size 1 npt(f)
    Fluid Outlet Size 1 npt(f)
    Weight 94.5 kg

    Manual

    TBD

    access_time
    Subscribe to this RSS feed

    This module uses: "overlay overlay-dark-color" suffixes

    access_time 10th September 2015 Get started