transfer pump

D0903 3/4" Double Diaphragm Pumps

D0903 3/4" Double Diaphragm Pumps

The D0903 is designed for handling light to medium viscosity fluid with high flow rates up to 120 liters per minutes. jQuery UI Accordion - No auto height

Features

  • High Flow rate, deliver up to 120 liters per minute, in a small portable package
  • Clean, hands-off fluid handling
  • Quiet running, up to 85dB with easy to use remote muffler capability for even lower noise levels

    • Application

      Typical Application
    • Drum transfer for fluids up 5000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    • Cleaning fluids and detergents
    • Plating and dip tanks
    • Water treatment
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.3 bar
    Maximum Flow Delivery 120 LPM
    Maximum pumpable fluid viscosity 5000 CPS
    Maximum Air Consumption 1200 LPM
    Maximum Suction Lift 8.3m
    Maximum size pumpable solids 2 mm
    Air pressure operating range 1.5 - 8.3 bar
    Air Inlet Size 1/2 pt
    Fluid Outlet Size 3/4 pt
    Fluid Inlet Size 3/4 pt

    Manual

    TBD

    access_time
    D0302 3/8" Double Diaphragm Pumps

    D0302 3/8" Double Diaphragm Pumps

    D0302 3/8" pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluids. Installed with Teflon plate at each of the diaphragm compartments, D0302 Pumps guarantee high endurance and durability. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 23 liters per minute, in a small portable package
  • Easy maintenance air valves and ball checks
  • Operate on as little as 20 psi (1.4bar) air pressure
  • Low noise

    • Application

      Typical Application
    • Drum transfer for fluids up 3000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 23 LPM
    Maximum pumpable fluid viscosity 3000 CPS
    Maximum Air Consumption 300 LPM
    Maximum Suction Lift 0.9 m dry, 6.3m wet
    Maximum size pumpable solids 1 mm
    Air pressure operating range 1.4 - 8.0 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 3/8 pt
    Fluid Inlet Size 3/8 pt

    Manual

    TBD

    access_time
    D0902 3/8" Double Diaphragm Pumps

    D0902 3/8" Double Diaphragm Pumps stars

    D0902 3/8" pumps are designed to operate at low air pressure while delivering a smooth, reliable flow. This is ideal for transferring a wide variety of fluids. Installed with Teflon plate at each of the diaphragm compartments, D0902 Pumps guarantee high endurance and durability. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, deliver up to 23 liters per minute, in a small portable package
  • Easy maintenance air valves and ball checks
  • Operate on as little as 20 psi (1.4bar) air pressure
  • Low noise

    • Application

      Typical Application
    • Drum transfer for fluids up 3000 cps
    • Circulation of low viscosity inks, stains and dyes
    • Waste fluid removal
    • Low viscosity adhesive supply
    Typical Fluids Handled
    • Waterborne paints
    • Solvent borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.0 bar
    Maximum Flow Delivery 23 LPM
    Maximum pumpable fluid viscosity 3000 CPS
    Maximum Air Consumption 300 LPM
    Maximum Suction Lift 0.9 m dry, 6.3m wet
    Maximum size pumpable solids 1 mm
    Air pressure operating range 1.4 - 8.0 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 3/8 pt
    Fluid Inlet Size 3/8 pt

    Manual

    TBD

    access_time
    D0306 1" Double Diaphragm Pumps

    D0306 1" Double Diaphragm Pumps

    Designed for high output per cycle, high power and performance.Ideal for transferring a wide variety of fluids. D0306 offers high pumping capacity in a small package. D0306 pumps are also available with a stainless steel body, which makes them ideal to operate in highly hygienic environment. jQuery UI Accordion - No auto height

    Features

  • High Flow rate, up to 133 liters per minute, in a small portable package
  • Clean, hands-off fluid handling
  • High performance with high mobility

    • Application

      Typical Application
    • Drum fluid transfer
    • Unloading fluids
    • Chemical evacuation
    Typical Fluids Handled
    • Chemicals
    • Contaminated surface water
    • Adhesives, varnishes, dispersions, solvents and stains
    • Resins, latexes, wood preservative stains, concrete paints and primers

    Techanical Data

    CategoryData
    Maximum Fluid Working Pressure 8.3 bar
    Maximum Flow Delivery 113 LPM
    Maximum pumpable fluid viscosity 5,000 CPS
    Maximum size pumpable solids 3.2 mm(116 PSI)
    Air pressure operating range 1-8 bar
    Air Inlet Size 1/4 pt
    Fluid Outlet Size 1 pt
    Fluid Inlet Size 1 pt

    Manual

    TBD

    access_time
    V0801 10" 55:1 Ram-Mounted Pumps

    V0801 10" 55:1 Ram-Mounted Pumps

    Easy handling extremely viscous fluidCOSMOSTAR V0801 High Viscous Fluid Transfer Pump concentrates on handling high viscous materials. It guarantees a smooth handling of high viscous materials with adequate flow rate for efficient work. jQuery UI Accordion - No auto height

    Features

    Cosmostar V0803 provide flow rate up to 14.4 liter per minute (3.8 gpm) and operating pressures up to 440 bars.
  • High output per cycle; reduced wearing for longer life and lower repair costs
  • Large internal porting for maximum flow
  • Additional Air-Powered Ram is available for improving performance

    • Application

    • Handling heavy-to-inflowing fluids
    • without having to inject additional viscosity reducer fluids.
    • Dispensing silicone, latex or acrylic sealants
    • Dispensing greases and other lubricants
    Typical Fluids Handled
    • Sealants
    • Adhesives
    • Lubricants

    Techanical Data

    CategoryData
    Air Motor Diameter 10 inches (Hulk)
    Pressure Ratio 55:1
    Maximum Fluid Working Pressure 440 Bar(6380 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate 14.4 lpm (3.8 gpm)
    Air Inlet Size 3/4 pt
    Fluid Inlet Size Ram-Mounted 5G or 55G
    Fluid Outlet Size 3/4" pt
    Weight 160 kg (55G)/ 110 kg(5G)

    Manual

    TBD

    access_time
    V0803 7" 40:1 Ram-Mounted Pumps

    V0803 7" 40:1 Ram-Mounted Pumps

    Easy handling extremely viscous fluidCOSMOSTAR V0803 High Viscous Fluid Transfer Pump concentrates on handling high viscous materials. It guarantees a smooth handling of high viscous materials with adequate flow rate for efficient work. jQuery UI Accordion - No auto height

    Features

    Cosmostar V0803 provide flow rate up to 14.4 liter per minute (3.8 gpm) and operating pressures up to 320 bars.
  • High output per cycle; reduced wearing for longer life and lower repair costs
  • Large internal porting for maximum flow
  • Additional Air-Powered Ram is available for improving performance

    • Application

    • Handling heavy-to-inflowing fluids
    • without having to inject additional viscosity reducer fluids.
    • Dispensing silicone, latex or acrylic sealants
    • Dispensing greases and other lubricants
    Typical Fluids Handled
    • Sealants
    • Adhesives
    • Lubricants

    Techanical Data

    CategoryData
    Air Motor Diameter 7 inches (Flash)
    Pressure Ratio 40:1
    Maximum Fluid Working Pressure 320 Bar(4640 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate 14.4 lpm (3.8 gpm)
    Air Inlet Size 1/2 npt(f)
    Fluid Inlet Size Ram-Mounted 5G or 55G
    Fluid Outlet Size 3/4" pt
    Weight 94.5 kg

    Manual

    TBD

    access_time
    P0169 10" 10:1 Transfer Pumps

    P0169 10" 10:1 Transfer Pumps stars

    Durability and endurance even in the harshest environment. COSMOSTAR P0169 Transfer Pump is designed to work under the toughest condition. Built-in with 10” HULK Air Motor that generates up to 10:1 ratio output pressure, P0169 Transfer Pump is customized to transfer very viscous materials with high flow rate (up to 60 liters/minute). jQuery UI Accordion - No auto height

    Features

  • Reliable medium pressure supply
  • Pressure output capacity of 80 Bar
  • 2-ball provides pump operation for uniform flow
  • Stainless steel model available to handle various fluids

    • Application

    • Paint circulating
    • Ahesive supply
    • Fluid transfer and supply
    Typical Fluids Handled
    • Textured materials
    • Adhesives and sealants
    • Polyester
    • Solvent-borne paints
    • Water-borne paints
    • Acid catalyzed varnishes, enamels and lacquers

    Techanical Data

    CategoryData
    Air Motor Diameter 10 inches (Hulk)
    Pressure Ratio 10:1
    Maximum Fluid Working Pressure 80 bar (1160 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate(60 CPM) 60 lpm (15.8 GPM)(
    Volume per Cycle 100 cc (
    Air Inlet Size 3/4" pt
    Fluid Inlet Size 1" or 3/4" pt
    Fluid Outlet Size 3/4 pt
    Weight 60 kg

    Manual

    TBD

    access_time
    P1302 4" 5:1 Transfer Pumps

    P1302 4" 5:1 Transfer Pumps stars

    Durability and endurance even in the harshest environment. Equipped with 4” ENCO Transfer Pump that generates up to 5:1 output pressure ratio, COSMOSTAR P1302 Transfer Pump is specialized to handle semi-viscous materials with flow-rate up to 8.5 liters/minute. COSMOSTAR P1302 Transfer Pump is the most affordable series of COSMOSTAR Transfer Pump and designed for low cost applications. jQuery UI Accordion - No auto height

    Features

  • Reliable medium pressure supply
  • Pressure output capacity of 40 Bar
  • 2-ball provides pump operation for uniform flow
  • Stainless steel model available to handle various fluids

    • Application

    • Paint circulating
    • Ahesive supply
    • Fluid transfer and supply
    Typical Fluids Handled
    • Textured materials
    • Adhesives and sealants
    • Polyester

    Techanical Data

    CategoryData
    Air Motor Diameter 4.0 inches (Enco)
    Pressure Ratio 5:1
    Maximum Fluid Working Pressure 40 bar (580 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate(60 CPM) 8.5 lpm (2.2 GPM)(
    Volume per Cycle 141 cc (
    Air Inlet Size 1/4 pt
    Fluid Inlet Size 1" or 3/4" pt
    Fluid Outlet Size 3/4 pt
    Weight 15.0 kg

    Manual

    TBD

    access_time
    P1312 6" 10:1 Transfer Pumps

    P1312 6" 10:1 Transfer Pumps stars

    Durability and endurance even in the harshest environment. COSMOSTAR P1312 Transfer Pump concentrates on handling high viscous materials. Also equipped with 6” COMPACT Transfer Pump that generates up to 10:1 output pressure ratio, P1312 Transfer Pump guarantees a smooth handling of high viscous materials with adequate flow-rate (up to 11.3 liters/minute). jQuery UI Accordion - No auto height

    Features

  • Reliable medium pressure supply
  • Pressure output capacity of 1200 PSI (83 Bar)
  • 2-ball provides pump operation for uniform flow
  • Stainless steel model available to handle various fluids

    • Application

    • Paint circulating
    • Ahesive supply
    • Fluid transfer and supply
    Typical Fluids Handled
    • Textured materials
    • Adhesives and sealants
    • Polyester

    Techanical Data

    CategoryData
    Air Motor Diameter 6.0 inches (Compact)
    Pressure Ratio 10:1
    Maximum Fluid Working Pressure 80 bar (1160 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate 11.6 lpm (3.0 GPM)(
    Air Inlet Size 1/4 pt
    Fluid Inlet Size 1" or 3/4" pt
    Fluid Outlet Size 3/4 pt
    Weight 20.0 kg

    Manual

    TBD

    access_time
    P0182 6" 3:1 Transfer Pumps

    P0182 6" 3:1 Transfer Pumps stars

    Durability and endurance even in the harshest environment. COSMOSTAR P0182 Transfer Pump concentrates on providing a high flow rate in transferring liquids between containers. Equipped with a 6” COMPACT air motor that generates up to 3:1 output pressure ratio, each P0182 Transfer Pump delivers up to 37.8 liters/minute, which makes COMPACT Transfer Pump ideal for jobs that require fast liquid traffic. jQuery UI Accordion - No auto height

    Features

  • Drum and stubby length models available for mounting and application flexibility
  • Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
  • Divorced air motor eliminates fluid and fume contamination, reducing maintenance
  • Stainless steel or carbon steel models available to handle various fluids

    • Application

    • Paint circulating
    • Cleaning and chemical supply
    • Fluid transfer and supply
    Typical Fluids Handled
    • Solvent-borne and waterborne fluid
    • Varnishes, enamels and lacquers
    • Cleaning fluids
    • Adhesives and sealants

    Techanical Data

    CategoryData
    Air Motor Diameter 6.0 inches (Compact)
    Pressure Ratio 3:1
    Maximum Fluid Working Pressure 24 bar (348 PSI)
    Maximum Air Input Pressure 8 Bar (116 PSI)
    Maximum Volume Flow Rate 37.8 lpm (10.0 GPM)(
    Air Inlet Size 1/4 pt
    Fluid Inlet Size 1-1/2 pt
    Fluid Outlet Size 3/4 pt
    Weight 25.0 kg

    Manual

    TBD

    access_time
    Subscribe to this RSS feed

    This module uses: "overlay overlay-dark-color" suffixes

    access_time 10th September 2015 Get started